Abstract:To investigate the influence of open-cut undercrossing of national highway 235 on the main bridge piers of Liuxiang Road west extension interchange,this work employed a combination of field monitoring and finite element simulation.Based on the supporting project,the three-dimensional computational model for both stratum and structure established using Plaxis 3D numerical analysis software,incorporated the HSS constitutive model to simulate the soil behavior.The entire process of open-cut tunnel construction in the undercrossing section was simulated.This analysis delved into the influence of the open-cut tunnel section of national highway 235 on the deformation and stress of piers on both sides of the main bridge of Liuxiang Road west extension interchange.Throughout the excavation of the foundation pit in the tunnel section,the finite calculation results for the horizontal displacement of the bracing structure closely aligned with the measured results,validating the calculation model.This affirmed the efficacy of the HSS constitutive model in simulating the open-cut construction of the undercrossing section.Finite element calculations revealed that,over the entire construction process of the open-cut construction and tunnel construction of the national highway 235 tunnel section,the viaduct piers on both sides experienced a certain degree of impact.The maximum horizontal and vertical displacements of the main bridge pier conformed to the deformation control requirements,ensuring the structural integrity and safety.

Nonlinear Finite Element Simulation For The Impact Between Over-High Truck And Bridge-Superstructure

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Simulation For The Impact Between Over-High Truck And Steel-Concrete Composite Bridge

Simulation of Impact between Over-high Truck and Viaduct Based on High Precision Nonlinear Finite Element Analysis

COLLISION BETWEEN OVER-HIGH TRUCKS AND BRIDGE SUPERSTRUCTURES: DAMAGE MECHANISM AND IMPACT LOADS

Mechanism and Damage Modes of Collision Between Over-high Trucks and Bridge Superstructures

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Tests for Collision Between Over-High Trucks and Steel Bridge Superstructures

Simulation for the impact between truck and composite viaduct

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Impact Tests of Model RC Columns by an Equivalent Truck Frame

Finite-element and simplified models for collision simulation between overheight trucks and bridge superstructures

Nonlinear Finite Element Analysis for a Prestressed Continuous Rigid Frame Concrete Bridge

Scaled Model Test for Collision Between Over-Height Truck and Bridge Superstructure

Simplified Model and Design Equations for the Collision between Over-high Truck and Bridge Superstructures

Experimental Study on the Collision Between Over-height Truck and Main Girder of Concrete T-girder Bridge

Research on Nonlinear Solid Finite Element Modeling for Bridge Structure

Engineering Calculation Method for Collision Force Between Over-height Truck and Bridge Superstructure

Dynamic response performance of bridge piers under non-bottom vehicle collision

Nonlinear FEM Analysis of Horizontal Impact Resistance of Deepwater High-Pile Foundations of Highway Bridges

Dynamic Response and Impact Force Calculation of PC Box Girder Bridge Subjected to Over-Height Vehicle Collision