Abstract:Overloaded truck and earthquake have become two main factors responsible for bridge damage, consequently the combination of heavy truck and seismic loads as a typical occurrence of extreme events is likely to lead to bridge collapse or destructive damage, in which the crucial issues of coupling load model, dynamic equations and bridge responses have not been adequately addressed. In this study, a simplified vehicle-bridge model consisting of many containers is established to simulate vehicle passage, and the dynamic equations are derived for a 5-axle truck on a simply supported beam as an illustration. Then, five ground motions selected from PEER with appropriate peak ground accelerations and durations and the three truck models specified in American Association of State Highway and Transportation Officials, Caltrans and Chinese codes are applied on the finite element model of a typical reinforced concrete continuous girder bridge, in which, vehicle speed, number of trucks, ground motion and vehicle type are assumed to be random variables and their influences on dynamic responses of the bridge are analyzed. The results show seismic load is the governing factor in dynamic responses but truck load may change displacement shapes; in addition, dynamic responses present a high sensitivity with the number of trucks (set as truck platoon) and gross vehicle weight but rare with vehicle speed. Specifically, the presence of a few trucks could serve as energy dissipation facilities for the bridge under seismic motions but may amplify the response when more trucks involved; some combinations of truck platoon with seismic excitation produce very large displacements and even cracks on the bridge, therefore, such an extreme event requires higher robustness in bridge design to make it be sustainable and serviceability after earthquakes.

Experimental Study on the Collision Between Over-height Truck and Main Girder of Concrete T-girder Bridge

Scaled Model Test for Collision Between Over-Height Truck and Bridge Superstructure

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Tests for Collision Between Over-High Trucks and Steel Bridge Superstructures

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Impact Tests of Model RC Columns by an Equivalent Truck Frame

Field Destructive Testing of a Reinforced Concrete Bridge Deck Slab

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

COLLISION BETWEEN OVER-HIGH TRUCKS AND BRIDGE SUPERSTRUCTURES: DAMAGE MECHANISM AND IMPACT LOADS

Finite-element and simplified models for collision simulation between overheight trucks and bridge superstructures

Mechanism and Damage Modes of Collision Between Over-high Trucks and Bridge Superstructures

Simulation For The Impact Between Over-High Truck And Steel-Concrete Composite Bridge

Nonlinear Finite Element Simulation For The Impact Between Over-High Truck And Bridge-Superstructure

Engineering Calculation Method for Collision Force Between Over-height Truck and Bridge Superstructure

Simulation and Analysis of a Collision Accident Between Over-high Truck and Pedestrian Bridge

Simplified Model and Design Equations for the Collision between Over-high Truck and Bridge Superstructures

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Simulation of Impact between Over-high Truck and Viaduct Based on High Precision Nonlinear Finite Element Analysis

Dynamic Responses of RC Girder Bridge under Heavy Truck and Seismic Loads Combined

COLLISION TEST OF A FRP BRIDGE BEAM