Abstract:In many applications of fluidized bed, large objects are coexisting with small emulsion solids. The object motion patterns and residence time distribution (RTD) in the bed have a paramount effect in the performance of the reactor. In this paper, a series of experiments were conducted to study the influence of the superficial gas velocity and the constitutive properties of large spherical objects on their RTD in a fluidized bed with inclined air distributor using Electrical Capacitance Tomography (ECT) tracing technique. The objects were larger and denser than the fine particles of the dense phase, with the ratio of object diameter to bed characteristic length approximately 0.14 and the ratio of object density to static bed density ranging from 1.5 to 5.0. Experimental results show that the RTD curves of large objects have a relatively large discrepancy from the ideal normal distribution. As an object's size and density increases, the mean residence time (MRT) of the object decreases initially and increases subsequently. With the increasing of the superficial gas velocity, the MRT decreases with a trend of falling down fast at first then getting slow. Based on a mechanical model of the object on an inclined air distributor, the behaviors of the object were properly explained. Finally, an empirical correlation was derived for the MRT using some of experimental data and dimensionless analysis. The validations of the correlation by other independent experimental data show that the predicted values of MRT are well in accordance with the experimental values, and most of the relative errors are within ±30%.

Effect of inclined distributor on the motion behavior of a large spherical object in the bottom zone of a fluidized bed

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Force Characteristic of a Large Dense Object in a Fluidized Bed Equipped with an Inclined Air Distributor

Dispersion Trajectory and Dynamics of Particles Injected from the Sidewall in the Gas–Solid Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Effect of gas distributor on gas–liquid dispersion and mass transfer characteristics in stirred tank

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

CFD simulation of effects of the configuration of gas distributors on gas–liquid flow and mixing in a bubble column

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Effect of distributor structure on the particle distribution in a vertical two-pass circulating fluidized bed evaporator with a baffle

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Investigating the fluidization of disk-like particles in a fluidized bed using CFD-DEM simulation

Experimental characterizing the residence time distribution of large spherical objects immersed in a fluidized bed

CFD-DEM study of impacts of the porous distributor medium on fluidization characteristics of a 2D-fluidized bed

Fluidization of the Spherocylindrical Particles: Comparison of Multi-Sphere and Bond-Sphere Models

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Effects of internals and distributors on the distribution and growth of bubbles in the conventional gas–solid fluidized bed

EXPERIMENTAL STUDY ON PARTICLE MOTION CHARACTERISTIC IN THE INTERNAL CIRCULATING FLUIDIZED BED