Abstract:Anion exchange membranes (AEMs) based diffusion dialysis (DD) is considered as a promising process for acid recovery from industrial acid wastewater due to its low energy consumption, easy installation protocol, and less operating cost. The driving force produced by the concentration difference between the feed side and dialysate side (usually is water) stimulates the separation of acids from salts in acid effluents (a spent liquor HCl/FeCl2 generated from steel refining industry). In this work, we prepared low cost, highly productive and self-organized nanostructured AEMs for acid recovery via DD. The AEMs were designed by introducing the quaternary ammoniums with long hydrophilic side chains into the hydrophobic poly(2,6-dimethyl-1,4-phenylene oxide) main chains, where the self-organized nanostructure was constructed through hydrophilic and hydrophobic microphase separation behavior. Afterwards, the thermo-crosslinking of -CH2Br segments put in order the nanostructures to cramp the active transport of the Fe2+ ions to improve the selectivity. The H-1 NMR, XPS, in-situ FTIR and AFM techniques confirmed the reaction progress and micro-topography of the prepared AEMs, respectively. Consequently, from the DD results, the hydrophilic side chains were imperative to achieve high acid flux and the thermal crosslinking attuned the channels to promote the selectivity between the acid and salt. At 25 degrees C, the AEMs (except for QPPO-1.0 membrane) showed higher H+ dialysis coefficients (U-H) ranged from 0.013 to 0.059 m h(-1), and outstanding separation factors (S) from 19 to 197. The observed results were high as compared with a commercial membrane DF-120 (U-H = 0.009 m h(-1), S = 18.5) and some recently reported membranes for HCl/FeCl2 solution.

Facile and Cost Effective PVA Based Hybrid Membrane Fabrication for Acid Recovery

Cationic Covalent Organic Framework Membranes with Stable Proton Transfer Channel for Acid Recovery

In-situ cross-linked porous anion exchange membranes with high performance for efficient acid recovery

A simple method to prepare anion exchange membrane by PVA/EVOH/MIDA for acid recovery by diffusion dialysis

Porous Anion Exchange Membrane for Effective Acid Recovery by Diffusion Dialysis

Diffusion Dialysis Membranes with Semi-Interpenetrating Network for Acid Recovery

Excellent dimensional stability anion exchange membrane based on PVA/EVOH/PyPECH for acid recovery by diffusion dialysis

Asymmetrically Porous Anion Exchange Membranes with an Ultrathin Selective Layer for Rapid Acid Recovery

Advanced Charged Porous Membranes with Ultrahigh Selectivity and Permeability for Acid Recovery

Porous Diffusion Dialysis Membranes for Rapid Acid Recovery

Facile Synthesis of Pyridinium Functionalized Anion Exchange Membranes for Diffusion Dialysis Application

Cation exchange hybrid membranes based on PVA for alkali recovery through diffusion dialysis

A Simple and Green Preparation of Pva-Based Cation Exchange Hybrid Membranes for Alkali Recovery

Self-organized Nanostructured Anion Exchange Membranes for Acid Recovery

Novel quaternized aromatic amine based hybrid PVA membranes for acid recovery

High-performance porous anion exchange membranes for efficient acid recovery from acidic wastewater by diffusion dialysis

Imidazolium Functionalized Anion Exchange Membrane Blended with Pva for Acid Recovery Via Diffusion Dialysis Process

Anion Exchange Membranes from Hot-Pressed Electrospun QPPO–SiO2 Hybrid Nanofibers for Acid Recovery

Anion exchange hybrid membranes from PVA and multi-alkoxy silicon copolymer tailored for diffusion dialysis process

Semiflexible Spiro-Branched Membrane with Adjustable Sub-Nanoscale Channels and High Positive Charge for Acid Recovery

Combination of OH–ions and –OH Groups Within QPPO/PVA Hybrid Membranes for Acid Recovery