High-performance porous anion exchange membranes for efficient acid recovery from acidic wastewater by diffusion dialysis

Jiuyang Lin,Junming Huang,Jing Wang,Junwei Yu,Xinqiang You,Xiaocheng Lin,Bart Van der Bruggen,Shuaifei Zhao

DOI: https://doi.org/10.1016/j.memsci.2021.119116

IF: 9.5

2021-04-01

Journal of Membrane Science

Abstract:<p>In the sustainability concept framework, wastewater highly loaded with acid is considered as a valuable resource, rather than a waste. Diffusion dialysis employing anion exchange membranes is a feasible solution to extracting acid from this waste stream. However, conventional anion exchange membranes have dense spatial structures with no observable pores even at nanoscale, which limits the transfer of protons. Porous anion exchange membranes provide a practical avenue to enhance the proton transfer due to their unique spatial structure. In this study, novel porous anion exchange membranes were designed by one-step crosslinking and quaternization of porous brominated poly (phenylene oxide) membrane substrate by 1, 4-diazabicyclo [2.2.2] octane. The resultant porous anion exchange membranes showed a high performance in acid recovery by diffusion dialysis, due to their uniquely tailored microstructures including an extremely thin selective layer and high free space volume. Specifically, the optimal anion exchange membrane possessed an acid dialysis coefficient of 0.066 ± 0.003 m h⁻¹ and an acid/salt separation factor of 96.9 ± 2.5 in the HCl/FeCl₂ mixture solution, outperforming the commercial anion exchange membrane (i.e., DF-120, acid dialysis coefficient of 0.0085 m h⁻¹ and acid/salt separation factor of 18.5). This study demonstrates the great potential in constructing advanced anion exchange membranes at large scale for efficient acid recovery from highly acidic wastewater to support environment sustainability.</p>

engineering, chemical,polymer science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to efficiently recover acid through Diffusion Dialysis (DD) technology when treating high - acidity wastewater. Specifically, traditional Anion Exchange Membranes (AEMs) have the problem of low acid recovery capacity during the diffusion dialysis process. This is mainly due to the fact that these membrane materials have a dense spatial structure with almost no visible pores, even at the nanoscale, which limits the proton transport efficiency. Therefore, the paper aims to design a new type of porous anion - exchange membrane to improve the efficiency of acid recovery, especially its performance in treating high - acidity wastewater.

To achieve this goal, the researchers designed a method for cross - linking and quaternizing a porous brominated poly(phenol oxide) (BPPO) membrane substrate through a one - step method, using 1,4 - diazabicyclo[2.2.2]octane (DABCO) as a reactant. This method not only increases the ion - exchange capacity of the membrane but also significantly enhances the dialysis coefficient of acid and the acid/salt separation factor, thus demonstrating the great potential of this new type of porous anion - exchange membrane in large - scale and efficient acid recovery.