T-stresses solution and out-of-plane constraint for central cracked plate (CCP) with I-II mixed mode crack under uniaxial compression
Li-Zhu Jin,Qi Pei,Chen-Yang Yu,Le Chang,Xiao-Hua He,Chang-Yu Zhou
DOI: https://doi.org/10.1016/j.tafmec.2021.103040
IF: 4.374
2021-10-01
Theoretical and Applied Fracture Mechanics
Abstract:<p>The crack tip constraint effect should be considered in the fracture assessment of structures with cracks, and the in-plane constraint and out-of-plane constraint should be illustrated simultaneously for the three-dimensional cracks in practical engineering structures. The constraint effect of central cracked plate (CCP) specimens with I-II mixed mode crack under uniaxial compression has been investigated quantitatively in present work. The relationship between T-stress components (T<sub>x</sub>, T<sub>y</sub>, T<sub>xy</sub>) and in-plane constraint parameter T<sub>11</sub> has been established. The effects of a wide range of in-plane and out-of-plane geometrical configurations (including relative crack length a/W and thickness to width ratio t/W), material parameters (including elastic modulus E and Poisson's ratio ν), crack inclination angle β and friction coefficient μ corresponding to stress intensity factors (K), in-plane constraint parameter T<sub>11</sub> and out-of-plane constraint parameters T<sub>33</sub> and T<sub>z</sub> at the crack tip have been calculated and discussed theoretically and numerically. It demonstrates that the constraint parameters can effectively express the stress-strain field at the crack tip. The relative crack length a/W has an influence on the in-plane and out-of-plane constraint parameters, and the thickness to width ratio t/W mainly affects the out-of-plane constraint parameters T<sub>33</sub> and T<sub>z</sub>. The out-of-plane constraint parameters should be considered for long cracks. There is a loss of out-of-plane constraint under compression when t/W less than or equal to 0.9, which can be much more directly and evidently investigated through the analysis of T<sub>z</sub> than T<sub>33</sub>. The empirical equations for K<sub>II</sub>, T<sub>11</sub> and T<sub>z</sub> have been obtained according to theoretical analysis and simulation results, which are convenient and effective for application.</p>
engineering, mechanical,mechanics