Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

High performance of intermediate temperature solid oxide electrolysis cells using Nd 2 NiO 4+δ impregnated scandia stabilized zirconia oxygen electrode

High performance solid oxide electrolysis cell with impregnated electrodes

Impregnated Nd2NiO4+- Scandia Stabilized Zirconia Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Performance enhancement of solution impregnated nanostructured La 0.8 Sr 0.2 Co 0.8 Ni 0.2 O 3-δ oxygen electrode for intermediate temperature solid oxide electrolysis cells

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc0.175Nb0.025Co0.8O3-δ Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc<sub>0.175</sub>Nb<sub>0.025</sub>Co<sub>0.8</sub>O<sub>3</sub><sub> -</sub> Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Performance evolution analysis of solid oxide electrolysis cells operating at high current densities

High-performance Oxygen Electrode for Reversible Solid Oxide Cells with Power Generation and Hydrogen Production at Intermediate Temperature

High-performance LaNi0.6Fe0.4O3-δ-La0.45Ce0.55O2-δ nanoparticles co-loaded oxygen electrode for solid oxide steam electrolysis

Sr2FeNbO6 Applied in Solid Oxide Electrolysis Cell As the Hydrogen Electrode: Kinetic Studies by Comparison with Ni-YSZ

Preparation Of Nanosized Nio-Ysz Composite Powders By Situ-Precipitation Method

Performance and Durability of Metal-Supported Solid Oxide Electrolysis Cells at Intermediate Temperatures

Ni-Sm2o3 Cermet Anodes for Intermediate-Temperature Solid Oxide Fuel Cells with Stabilized Zirconia Electrolytes

Performance of Reversible Solid Oxide Cells Based on La0.6Ca0.4Fe0.7Sc0.1Ni0.2O3– Oxygen Electrode

Preparation of NiO–YSZ composite powder by a combustion method and its application for cathode of SOEC

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Fabrication and Electrochemical Characterizations of Nd2NiO4+δ-Ce0.8Gd0.2O2−δ Composite Cathodes for Anode-Supported Intermediate Temperature Solid Oxide Fuel Cells

Nanoarchitecturing hydrogen electrode with intimately coupled ion-conducting and catalytic phases for enhanced intermediate-temperature steam electrolysis

Electrochemical performance and microstructural characterization of solid oxide electrolysis cells

High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodes