Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Performance enhancement of solution impregnated nanostructured La 0.8 Sr 0.2 Co 0.8 Ni 0.2 O 3-δ oxygen electrode for intermediate temperature solid oxide electrolysis cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Enhanced Electrochemical Performance of Solution Impregnated La0.8Sr0.2Co0.8Ni0.2O3−δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

La0.8Sr0.2Co0.8Ni0.2O3-δ Impregnated Oxygen Electrode for H2O/CO2 Co-Electrolysis in Solid Oxide Electrolysis Cells

Interface Engineering of La0.6Sr0.4Co0.2Fe0.8O3−δ/Gd0.1Ce0.9O1.95 Heterostructure Oxygen Electrode for Solid Oxide Electrolysis Cells with Enhanced CO2 Electrolysis Performance

High-performance Oxygen Electrode for Reversible Solid Oxide Cells with Power Generation and Hydrogen Production at Intermediate Temperature

Effect of Gd0.2Ce0.8O1.9 Nanoparticles on the Oxygen Evolution Reaction of La0.6Sr0.4Co0.2Fe0.8O3-δ Anode in Solid Oxide Electrolysis Cell

Nanostructured GDC-impregnated La0.7Ca0.3CrO3−δ symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas

High-performance LaNi0.6Fe0.4O3-δ-La0.45Ce0.55O2-δ nanoparticles co-loaded oxygen electrode for solid oxide steam electrolysis

Electrochemical Performance of La0.65Sr0.35MnO3 Oxygen Electrode with Alternately Infiltrated Sm0.5Sr0.5CoO3-δ and Sm0.2Ce0.8O1.9 Nanoparticles for Reversible Solid Oxide Cells

LSCM-GDC as composite cathodes for high temperature steam electrolysis: Performance optimization by composition and microstructure tailoring

Palladium and ceria infiltrated La0.8Sr0.2Co0.5Fe0.5O3-δ cathodes of solid oxide fuel cells

A high performance intermediate-temperature solid oxide fuel cell using impregnated La0.6Sr0.4CoO3−δ cathode

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

High performance La2NiO4+δ impregnated La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes for solid oxide fuel cells

Electrochemical performance of Co-containing mixed oxides as oxygen electrode materials for intermediate-temperature solid oxide electrolysis cells

Gd 0.2 Ce 0.8 O 1.9 纳米颗粒对固体氧化物电解池La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3- δ 阳极析氧反应的影响

Enhancing the CO2 Electrolysis Performance by Ce Doped La0⋅7Sr0⋅3Fe0⋅9Ni0⋅1O3-δ Electrode in Symmetric Solid Oxide Electrolysis Cell

High-performance Gd0.2Ce0.8O2-impregnated LaNi0.6Fe0.4O3−δ cathodes for intermediate temperature solid oxide fuel cell

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

High performance of intermediate temperature solid oxide electrolysis cells using Nd 2 NiO 4+δ impregnated scandia stabilized zirconia oxygen electrode