Abstract:The spinel lithium-ion battery anode material Li 4 Ti 5 O 12 (LTO) exhibits stable cycling and is less prone to lithium dendrite and solid electrolyte interphase (SEI) films. However, its theoretical capacity and conductivity are low within the electrochemical window of 1.0–3.0 V. In this study, we utilized active carbon (AC) coated and micron Silicon (Si) doped Li 4 Ti 5 O 12 , applying an extended electrochemical window of 0.01–3.0 V during cycling to enhance the material's electrochemical performance. Our investigation revealed that bare LTO sample as well as those with single Silicon doping or active carbon coating experienced rapid decay during high-rate long cycling tests. Conversely, the Silicon-carbon composite LSiAC sample (87 wt% Li 4 Ti 5 O 12 + 3 wt% AC + 10 wt% Si) demonstrated a capacity of 349.19 mAh g −1 (98.28%) at a 1C rate after 200 cycles, and achieved a capacity of 196.56 mAh g −1 (89.37%) after 1000 cycles at a 5C rate,; in comparison, bare LTO exhibited capacities of only 230 .98 mAh g −1 (1C-89.71%)and 145.63 mAh g −1 (5C-82.48%). This improvement can be attributed to three factors: first, the active carbon enhances material conductivity while the active carbon coating and SEI films simultaneously as a barrier isolating Li 4 Ti 5 O 12 from the electrolyte LiPF 6 , thereby preventing structural degradation; second, micron Si doping into Li 4 Ti 5 O 12 crystals introduces additional capacity and leads to an appropriate amount of expansion during cycling, effectively increasing crystal plane spacing and facilitating Li + migration. Final, the multi-layer core–shell structure consisting of Li 4 Ti 5 O 12 , active carbon coating, and SEI films acts as the buffer successfully limits the Si-Li 15 Si 4 phase transition volume expansion. The proposed modification process is straightforward and environmentally friendly, making it suitable for industrial-scale production. This approach holds promise in bolstering the competitiveness of spinel Li 4 Ti 5 O 12 as an anode material in the Lithium-ion battery market. Graphical

Electrochemical Impedance Spectroscopy Analysis for Lithium-Ion Battery Using Li4Ti5O12 Anode

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Electrochemical Impedance Analysis of Electrodeposited Si–O–C Composite Thick Film on Cu Microcones-Arrayed Current Collector for Lithium Ion Battery Anode

Superior Rate Performance of Li 4 Ti 5 O 12 /tio 2 /c/cnts Composites Via Microemulsion-Assisted Method As Anodes for Lithium Ion Battery

Recent Development in the Rate Performance of Li4Ti5O12

Electrochemical Profile of Lithium Titanate/Hard Carbon Composite As Anode Material for Li-Ion Batteries

Electrochemical Impedance Spectroscopy Illuminating Performance Evolution of Porous Core–Shell Structured Nickel/Nickel Oxide Anode Materials

Nonequilibrium fast-lithiation of Li 4 Ti 5 O 12 thin film anode for LIBs

Li4Ti5O12 Coated by Biomass-Derived Carbon Quantum Dots as Anode Material with Enhanced Electrochemical Performance for Lithium-Ion Batteries

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

High Performance of Pb-doped Li4Ti5O12 as an Anode Material for Lithium Ion Batteries

Study of spinel Li4Ti5O12electrode reaction mechanism byelectrochemical impedance spectroscopy

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Investigation of Layered LiNi1/3Co1/3Mn1/3O2 Cathode of Lithium Ion Battery by Electrochemical Impedance Spectroscopy

New Insight into the Atomic-Scale Bulk and Surface Structure Evolution of Li4ti5o12 Anode

Soccerene-like Li4Ti5O12/C as anode materials for fast-charging Li-ion batteries

Electrochemical and transport properties of Te-doped Li4Ti5O12 as anode material for lithium-ion half/full batteries

Al Ions Doping Effect on The Diffusion Coefficient and Capacity of Li4Ti5O12 (Lithium Titanate, LTO) in Lithium-Ion Battery Anode

Capacity Loss Mechanism of the Li4Ti5O12 Microsphere Anode of Lithium-Ion Batteries at High Temperature and Rate Cycling Conditions

Investigation on Li4Ti5O12 Batteries Developed for Hybrid Electric Vehicle

Effective Oxygen‐Deficient Li4Ti5O12 Anode Material Displaying Excellent Rate Performance and Outstanding Cyclic Stability