Abstract:The spinel lithium-ion battery anode material Li 4 Ti 5 O 12 (LTO) exhibits stable cycling and is less prone to lithium dendrite and solid electrolyte interphase (SEI) films. However, its theoretical capacity and conductivity are low within the electrochemical window of 1.0–3.0 V. In this study, we utilized active carbon (AC) coated and micron Silicon (Si) doped Li 4 Ti 5 O 12 , applying an extended electrochemical window of 0.01–3.0 V during cycling to enhance the material's electrochemical performance. Our investigation revealed that bare LTO sample as well as those with single Silicon doping or active carbon coating experienced rapid decay during high-rate long cycling tests. Conversely, the Silicon-carbon composite LSiAC sample (87 wt% Li 4 Ti 5 O 12 + 3 wt% AC + 10 wt% Si) demonstrated a capacity of 349.19 mAh g −1 (98.28%) at a 1C rate after 200 cycles, and achieved a capacity of 196.56 mAh g −1 (89.37%) after 1000 cycles at a 5C rate,; in comparison, bare LTO exhibited capacities of only 230 .98 mAh g −1 (1C-89.71%)and 145.63 mAh g −1 (5C-82.48%). This improvement can be attributed to three factors: first, the active carbon enhances material conductivity while the active carbon coating and SEI films simultaneously as a barrier isolating Li 4 Ti 5 O 12 from the electrolyte LiPF 6 , thereby preventing structural degradation; second, micron Si doping into Li 4 Ti 5 O 12 crystals introduces additional capacity and leads to an appropriate amount of expansion during cycling, effectively increasing crystal plane spacing and facilitating Li + migration. Final, the multi-layer core–shell structure consisting of Li 4 Ti 5 O 12 , active carbon coating, and SEI films acts as the buffer successfully limits the Si-Li 15 Si 4 phase transition volume expansion. The proposed modification process is straightforward and environmentally friendly, making it suitable for industrial-scale production. This approach holds promise in bolstering the competitiveness of spinel Li 4 Ti 5 O 12 as an anode material in the Lithium-ion battery market. Graphical

New Insight into the Atomic-Scale Bulk and Surface Structure Evolution of Li4ti5o12 Anode

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

Structure and Electrochemical Properties of Spinel Li4ti5o12 Nanocomposites As Anode for Lithium-Ion Battery

The Origin of Enhanced Conductivity and Structure Change in Defective Li4Ti5O12 or Blue-LTO : a study combined theoretical and experimental perspectives

Li4Ti5O12 Spinel Anode: Fundamentals and Advances in Rechargeable Batteries

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Surface Evolution of Lithium Titanate upon Electrochemical Cycling Using a Combination of Surface Specific Characterization Techniques

Microscopic Origin of the Ionic Transport Behaviors in Solid Electrolytes for Li Batteries

Electronic Structure of Anode Material Li2TiSiO5 and Its Structural Evolution During Lithiation

High-voltage Performance of LiCoO2 Cathode Studied by Single Particle Microelectrodes –influence of Surface Modification with TiO2

Li-ion Battery Material under High Pressure: Amorphization and Enhanced Conductivity of Li4Ti5O12

A Facile Surface Reconstruction Mechanism Toward Better Electrochemical Performance of Li4Ti5O12 in Lithium-Ion Battery.

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Synthesis and electrochemical performance of nanoporous Li4Ti5O12 anode material for lithium-ion batteries

Synergetic charge transfer from Ti O2− basic centers at Li4Ti5O12 spinel surface

Structural evolution of plasma sprayed amorphous Li4Ti5O12 electrode and ceramic/polymer composite electrolyte during electrochemical cycle of quasi-solid-state lithium battery

Direct visualization of solid electrolyte interphase on Li4Ti5O12 by in situ AFM

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Three-dimensional atomic-scale observation of structural evolution of cathode material in a working all-solid-state battery

Atomic insights into surface orientations and oxygen vacancies in the LiMn2O4 cathode for lithium storage