Abstract:The most popular anode material in commercial Li-ion batteries is still graphite. However, its low intercalation potential is close to that of lithium, which results in the dendritic growth of lithium at its surface, and the formation of a passivation film that limits the rate capability and may result in safety hazards. High-performance anodes are thus needed. In this context, lithium titanite oxide (LTO) has attracted attention as this anode material has important advantages. Due to its higher lithium intercalation potential (1.55 V vs. Li+/Li), the dendritic deposition of lithium is avoided, and the safety is increased. In addition, LTO is a zero-strain material, as the volume change upon lithiation-delithiation is negligible, which increases the cycle life of the battery. Finally, the diffusion coefficient of Li+ in LTO (2 × 10−8 cm2 s−1) is larger than in graphite, which, added to the fact that the dendritic effect is avoided, increases importantly the rate capability. The LTO anode has two drawbacks. The energy density of the cells equipped with LTO anode is lower compared with the same cells with graphite anode, because the capacity of LTO is limited to 175 mAh g−1, and because of the higher redox potential. The main drawback, however, is the low electrical conductivity (10−13 S cm−1) and ionic conductivity (10−13–10−9 cm2 s−1). Different strategies have been used to address this drawback: nano-structuration of LTO to reduce the path of Li+ ions and electrons inside LTO, ion doping, and incorporation of conductive nanomaterials. The synthesis of LTO with the appropriate structure and the optimized doping and the synthesis of composites incorporating conductive materials is thus the key to achieving high-rate capability. That is why a variety of synthesis recipes have been published on the LTO-based anodes. The progress in the synthesis of LTO-based anodes in recent years is such that LTO is now considered a substitute for graphite in lithium-ion batteries for many applications, including electric cars and energy storage to solve intermittence problems of wind mills and photovoltaic plants. In this review, we examine the different techniques performed to fabricate LTO nanostructures. Details of the synthesis recipes and their relation to electrochemical performance are reported, allowing the extraction of the most powerful synthesis processes in relation to the recent experimental results.

Electrochemical Profile of Lithium Titanate/Hard Carbon Composite As Anode Material for Li-Ion Batteries

High Rate Li4Ti5O12–Fe2O3 and Li4Ti5O12–CuO Composite Anodes for Advanced Lithium Ion Batteries

Nanocomposites As Anode for Lithium-Ion Battery

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Superior Rate Performance of Li 4 Ti 5 O 12 /tio 2 /c/cnts Composites Via Microemulsion-Assisted Method As Anodes for Lithium Ion Battery

Hard Carbon/lithium Composite Anode Materials for Li-ion Batteries

Facile Synthesis of Carbon-Coated Spinel Li4Ti5O12/Rutile-TiO2 Composites As an Improved Anode Material in Full Lithium-Ion Batteries with LiFePO4@N-Doped Carbon Cathode

Hard Carbon Coated Nano-Si/graphite Composite As a High Performance Anode for Li-ion Batteries

Hard Carbon/Li2.6co0.4n Composite Anode Materials for Li-Ion Batteries

Electrochemical Performance of Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/TiO<sub>2</sub>/Li<sub>0.4</sub>TiO<sub>2</sub>/C Composite Prepared by the Electrospinning Method Using as Lithium Battery Anode Material

Li4Ti5O12/TiO2 composite as anode materials for lithium ion battery

Li4ti5o12-Coated Graphite Anode Materials for Lithium-Ion Batteries

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

Oxalic acid-assisted preparation of LTO-carbon composite anode material for lithium-ion batteries

Nano-structure and characterization of carbon composite with Al3+ and Mn4+ co-doped Li4Ti5O12 as anodes for Li-ion batteries

One-pot synthesis of soft carbon-combined Li2TiSiO5 composites with oxygen vacancies as long life and high rate anodes for lithium-ion batteries

High Rate Cycling Performance of Nanosized Li4Ti5O12/graphene Composites for Lithium Ion Batteries

Hard carbon/Li {sub 2.6} Co {sub 0.4} N composite anode materials for Li ion batteries

Novel Hard Carbon/graphite Composites Synthesized by a Facile in Situ Anchoring Method As High-Performance Anodes for Lithium-Ion Batteries

Preparation and properties of Sn composite C-coated Li4Ti5O12 materials for lithium–sulfur battery anodes

Fabrication of Li4Ti5O12 (LTO) as Anode Material for Li-Ion Batteries