Abstract:Taking advantage of the extended specific surface area and high conductivity, graphene has been widely subjected to extensive investigations by many research groups. Herein, three-dimensional graphene (3DG) were prepared by a facile and scalable ion-exchange method, which exhibited a porous structure with a specific surface area of 2400 m(2)/g and pore volume of 2.0 cm(3)/g. In a typical sysnthesis, two procedures played an important role in preparing the novel characteristics of 3DG: First, metal ions were used as the catalysis to graphitize the ion-exchange resin. Second, an KOH activation step at low temperatures (800) was applied on the exchange resin to produce a hierarchical porous structure of 3DG materials. The method of catalysis, chemical activation and heating treatment can form a unique interconnected structure and also effectively prevent graphene nanosheets from aggregating. Various structural and morphology analyses have been characterized by X-ray powder diffraction, Raman, Scanning electron microscope and Transmission electron microscope. Additionally, the enhanced specific surface area can improve capacitor performance of 3DG, which exhibited a high specific capacitance of 250 F/g when measured in a three-electrode system (KOH aqueous solution) and 120 F/g in asymmetric supercapacitor (TEMABF(4)/PC organic electrolytes). Furthermore, the as-prepared 3DG were successfully employed as both cathode and anode active materials for lithium ion capacitors (3DG-LIC) with high energy density (105 Wh/kg) because the potential window of 3DG-LIC extended from 2.5 to 4.0 V compared to traditional supercapacitor (SC) by prelithiation of anode. The performance and operating mechanism of 3DG-LIC were further studied by cyclic voltammetry, gals anostatic charge/discharge, and electrochemical impedance spectroscopy. The similar chemistry and microstructure maximizes the capacity and rate performance of cathode and anode, which indicates that the 3DG-LIC can be a promising candidate for high-energy power storage system and would have a wide application in other electrochemical applications.

Micro Li-ion capacitor with activated carbon/graphite configuration for energy storage

Silicon-nanoforest-based solvent-free micro-supercapacitors with ultrahigh spatial resolution <i>via</i> IC-compatible <i>in situ</i> fabrication for on-chip energy storage

A High-Performance Micro Lithium-Ion Capacitor with 3D Interdigital Electrodes for On-Chip Energy Storage

Micro Supercapacitors Based on A 3d Structure with Symmetric Graphene or Activated Carbon Electrodes

A High-Energy-density Micro Supercapacitor of Asymmetric MnO2–carbon Configuration by Using Micro-Fabrication Technologies

High-energy-density on-chip Li-ion capacitors

Lithium Ion Hybrid Supercapacitor Based on Three-Dimensional Flower-Like Nb 2 O 5 and Activated Carbon Electrode Materials

High energy density Li-ion capacitor assembled with all graphene-based electrodes

A Sustainable Li-Ion Capacitor Using Sawdust-Derived Activated Carbon Cathode Paired with Prelithiated Al Foil Anode

All-solid-state flexible planar lithium ion micro-capacitors

A high-performance three-dimensional micro supercapacitor based on self-supporting composite materials

All Graphene Lithium Ion Capacitor with High-Energy-Power Density Performance

Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage

High-energy-density, All-Solid-state Microsupercapacitors with Three-Dimensional Interdigital Electrodes of Carbon/polymer Electrolyte Composite

Hard@Soft Integrated Morning Glory Like Porous Carbon as a Cathode for a High-Energy Lithium Ion Capacitor.

A high-energy aqueous on-chip lithium-ion capacitor based on interdigital 3D carbon microelectrode arrays

Toward high energy-density and long cycling-lifespan lithium ion capacitors: a 3D carbon modified low-potential Li2TiSiO5 anode coupled with a lignin-derived activated carbon cathode

Fabrication of 5 V High-Performance Solid-State Asymmetric Supercapacitor Device Based on MnO2/Graphene/Ni Electrodes

Biomass-Derived Electrode for Next Generation Lithium-Ion Capacitors

Three-dimensional "skin-framework" hybrid network as electroactive material platform for high-performance solid-state asymmetric supercapacitor

Direct prototyping of 3D micro supercapacitors based on in-situ fabricated nanoporous carbon electrodes