Abstract:Supercapacitors have been regarded as one of the next-generation energy storage devices because of the high power density, excellent cycling performance, long lifespan and easy maintenance. However, its relatively low specific energy hinders its application in the future. Recently, Na-ion based aqueous hybrid supercapacitors have attracted worldwide attention due to its high energy density, environment friendly and low cost. In our work, the Na-ion aqueous hybrid supercapacitor is constructed with NaTi2(PO4)(3)/C and commercial activated carbon as electrode materials. NaTi2(PO4)(3)/C nanoparticles with the size of about 40 nm were synthesized by high-temperature solid state reaction method using the NaTi2(PO4)(3)/C precursor that was prepared through the solution method with Ti(C4H9O)(4), NH4H2PO4, Na2CO3 as the raw materials, and citric acid as the carbon source. The electrochemical tests were performed using 1 mol.L-1 Na2SO4 solution as the electrolyte. The carbon-coated NaTi2(PO4)(3) electrode delivers the discharge capacity of 122 mAh.g(-1) and shows an excellent cycling stability with the retention of 60% of the initial capacity after 1000 cycles at a 10C rate. The supercapacitor was consisted of NaTi2(PO4)(3)/C anode, AC cathode and 1 mol.L-1 Na2SO4 electrolyte. And the weight ratio of active materials in cathode and anode was 2.2. Cyclic voltammetry, galvanostatic test were employed to study the electrochemical properties of the supercapacitor. The as-fabricated device was then cycled between 0.15 similar to 1.4 V with different current density. Our results show the power density of 121.15 W.kg(-1) with specific energy of 18.71 Wh.kg(-1) at the current density of 0.5 A.g(-1). Moreover, the specific energy and power density goes to 14.13 Wh.kg(-1) and 2.42 kW.kg(-1) at a higher current density of 10 A.g(-1). More importantly, the device showed an excellent cycling stability with the retention of 76% after 1000 cycles at a current density of 1 A.g(-1). This research shows the designed hybrid supercapacitor has the potential to be used as auxiliary high-power energy storage device for the practical applications.

Lithium Ion Hybrid Supercapacitor Based on Three-Dimensional Flower-Like Nb 2 O 5 and Activated Carbon Electrode Materials

3D hollow NiCo LDH nanocages anchored on 3D CoO sea urchin-like microspheres: A novel 3D/3D structure for hybrid supercapacitor electrodes

Three-Dimensional Tree-Like (ni,co)se 2 /ni(oh) 2 Hybrid Electrode for Flexible Supercapacitors

High-Energy Li-Ion Hybrid Supercapacitor Enabled by A Long Life N-Rich Carbon Based Anode

A novel nickel and cobalt-layered double Hydroxide@Nickel borate with three-dimensional flower-like structure as electrode material for high-performance hybrid supercapacitor

A Hybrid Supercapacitor Fabricated with a Carbon Nanotube Cathode and a TiO2–B Nanowire Anode

Orthorhombic Niobium Oxide Nanowires for Next Generation Hybrid Supercapacitor Device

Development and Characterization of Aqueous Sodium-Ion Hybrid Supercapacitor Based on NaTi2(PO4)(3)//activated Carbon

Tunable Synthesis of 3D Niobium Oxynitride Nanosheets for Lithium-Ion Hybrid Capacitors with High Energy/Power Density

Study on the Aqueous Hybrid Supercapacitor Based on Carbon-coated NaTi2(PO4)3 and Activated Carbon Electrode Materials

3D Hierarchical Oxygen-Deficient AlCoNi-(oxy)hydroxides/N-doped Carbon Hybrids Enable Efficient Battery-Type Asymmetric Supercapacitor

Full Synergistic Contribution of Electrodeposited Three-Dimensional Nico2o4@Mno2 Nanosheet Networks Electrode for Asymmetric Supercapacitors

Hierarchical flower-like architecture of nickel phosphide anchored with nitrogen-doped carbon quantum dots and cobalt oxide for advanced hybrid supercapacitors

Advanced hybrid supercapacitors assembled with CoNi LDH nanoflowers and nanosheets as high-performance cathode materials

Hollow Nano-flowers NiCo2O4@Nb2COx MXene Heterostructure via Interfacial Engineering for High-performance Flexible Supercapacitor Electrodes

Flower‐like NiCo‐carbonate Hydroxides for High‐performance Solid‐state Hybrid Supercapacitor

Fabrication of a novel nanohybrid via the introduction of Ni/Mn-LDH into Ni-MOFs/MWCNTs for high-performance electrochemical supercapacitor

Self-assembling NiCo2S4 nanorods arrays and T-Nb2O5 nanosheets/three-dimensional nitrogen-doped garphene hybrid nanoarchitectures for advanced asymmetric supercapacitor

A 3d hierarchical hybrid nanostructure of carbon nanotubes and activated carbon for high-performance supercapacitors

Flower-shaped Ni(OH)2 decorated with biomass-derived carbon TPB-1 for asymmetric supercapacitors

Hierarchical NiCo-LDH/NiCoP@NiMn-LDH hybrid electrodes on carbon cloth for excellent supercapacitors