Abstract:In this paper, a high-throughput continuous, single-face texturing method was introduced into the fabrication process for industrial multicrystalline silicon solar cell production. With a patterned photoresist film as the mask for the wet etching, wafers without back protection were transported by rollers and only the masked face could contact the etching solution and be etched through the mask openings. The first etching results indicated that serious heat aggregation and poor wettability of the acid solution on the mask surface resulted in a seriously uneven and uncontrolled etching reaction. However, after applying a surfactant to the photoresist mask to improve the masks hydrophility, a stable and uniform etching reaction could be achieved. A honeycomb-like textured surface with a pitch of 18 mu m was fabricated successfully. The etched pits had a nearly smooth spherical segment surface and a surface occupancy of 70%. This regular textured surface had a low in-plane average reflectivity of approximately 20% and greatly increased the carrier lifetime. Compared with multicrystalline silicon solar cells textured by conventional acid etching, the average efficiency increased from 18.31% to 18.57%. In addition, this texturing technique is expected to promote the application of diamond-wire cut multicrystalline silicon wafers in the future.

Improving Efficiency of Silicon Heterojunction Solar Cells by Surface Texturing of Silicon Wafers Using Tetramethylammonium Hydroxide

A Simple Texturization Approach for Mono-Crystalline Silicon Solar Cell with Low Tmah Concentration Solution

Texturization of Mono-Crystalline Silicon Solar Cells in TMAH Without the Addition of Surfactant

Modification of Surface Morphology of A Textured Silicon Substrate and Its Application in Heterojunction Solar Cells

Investigation of Texturization for Monocrystalline Silicon Solar Cells with Different Kinds of Alkaline

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Effects of IPA on texturing process for mono-crystalline silicon solar cell in TMAH solution

Acid Texturing of Large Area Multi-Crystalline Silicon Wafers for Solar Cell Fabrication

TEXTURIZATION OF MONOCRYSTALLINE SILICON FOR SOLAR CELLS

Electrochemical Oxidation Pre-Treatment for Wet Texturing of Monocrystalline Silicon Solar Cells

A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask

INFLUENCE OF SUB-SURFACE DAMAGE ON TEXTURING OF MONOCRYSTALLINE SILICON WAFERS FOR SOLAR CELLS

Investigation of Texturing Industrial Mono-Crystalline Silicon Solar Cells

Constructing Submicron Textures on Mc-Si Solar Cells Via Copper-Catalyzed Chemical Etching

Enhanced Efficiency of Graphene-Silicon Schottky Junction Solar Cell through Pyramid Arrays Texturation

Effects of Different Alcohols on Texture Properties of Monocrystalline Silicon

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

A Continuous, Single-Face Wet Texturing Process for Industrial Multicrystalline Silicon Solar Cells Using a Surfactant Treated Photoresist Mask

Research of Texturization on Multi-crystalline Silicon Surface for Solar Cell

Texturization of Cast Multicrystalline Silicon for Solar Cells

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles