Abstract:Organic liquid compound electrolytes are widely applied in conventional lithium-ion batteries. However, their disadvantages of unsafety and complexity of battery fabrication can hardly be avoided [1]. All-solid-state batteries without using liquid electrolytes provide an effective way to overcome these problems and studies on this field are increasing [2]. Solid electrolyte material is the critical factor to affect the electrochemical and cycle performances of all-solid-state batteries. For commercial application of all-solid-state batteries, high ionic conductivity and cyclability at room temperature are indispensable. Metal sulfides are in great potential to meet the practical application as solid electrolytes and a series of solid sulfur compounds with high ionic conductivities have been reported [3,4]. In this work, a new material Li17Ge2P3S20 with new crystal structure has been synthesized via a simple solid state reaction. The new structure is detected using XRD patterns as shown in Figure 1. AC impedance has been performed and the ionic conductivity of Li17Ge2P3S20 is determined to be 8.07×10-3 S/cm at room temperature. Experimental parameters have been optimized and elemental doping has been utilized to enhance the conductivity and stability of this material as solid electrolyte for all-solid-state lithium ion batteries. Acknowledgement This work was financially supported by the Shenzhen Peacock Plan (KQCX20140522150815065)，the Natural Science Foundation of Shenzhen ( JCYJ20150331101823677) and the Science and Technology Innovation Foundation for the Undergraduates of SUSTC(2015x19 and 2015x12) References: [1] Etacheri V, Marom R, Elazari R, et al. Challenges in the development of advanced Li-ion batteries: a review[J]. Energy & Environmental Science, 2011, 4(9): 3243-3262. [2] Notten P H L, Roozeboom F, Niessen R A H, et al. 3‐D integrated all‐solid‐state rechargeable batteries[J]. Advanced Materials, 2007, 19(24): 4564-4567. [3] Kamaya N, Homma K, Yamakawa Y, et al. A lithium superionic conductor[J]. Nature materials, 2011, 10(9): 682-686. [4] Kato Y, Hori S, Saito T, et al. High-power all-solid-state batteries using sulfide superionic conductors[J]. Nature Energy, 2016, 1: 16030. Figure 1

High performance Li 2 S–P 2 S 5 solid electrolyte induced by selenide

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Enhanced Ionic Conductivity and Air Stability of Bi2se3-Doped 80Li2s-20P2s5 Solid-State Electrolytes

Improved Ionic Conductivity and Air Stability of Li7P3S11 by SnSe2 Doping and Two-Step Pressing Sintering Method

Enhanced ionic conductivity of sulfide-based solid electrolyte by incorporating lanthanum sulfide

Incorporation of halogens (Cl, Br, and I) in an Li–P–S–O system for exploring new sulfide solid electrolytes with high conductivity and superior electrochemical performance in solid-state batteries

High‐Performance Li–SeS <i> <sub>x</sub> </i> All‐Solid‐State Lithium Batteries

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

Li10Ge(P1–xSbx)2S12 Lithium-Ion Conductors with Enhanced Atmospheric Stability

Li8P2S9 solid electrolyte with high ionic conductivity and air stability by Bi2Se3 co-doping

A Novel Solid Electrolyte Material (li17ge2p3s20) with High Ionic Conductivity

Engineering high conductive Li7P2S8I via Cl- doping for all-solid-state Li-S batteries workable at different operating temperatures

Improvement of stability and solid-state battery performances of annealed 70Li2S–30P2S5 electrolytes by additives

All-solid-state batteries with Li2O-Li2S-P2S5 glass electrolytes synthesized by two-step mechanical milling

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries

High-Performance Li-SeS x All-Solid-State Lithium Batteries.

Tailored Li2s-P2s5 Glass-Ceramic Electrolyte By Mos2 Doping, Possessing High Ionic Conductivity For All-Solid-State Lithium-Sulfur Batteries

Enabling superior electrochemical performances of Li10SnP2S12-based all-solid-state batteries using lithium halide electrolytes

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

Lithium-rich diamond-like solid electrolytes for lithium batteries