Abstract:Organic liquid compound electrolytes are widely applied in conventional lithium-ion batteries. However, their disadvantages of unsafety and complexity of battery fabrication can hardly be avoided [1]. All-solid-state batteries without using liquid electrolytes provide an effective way to overcome these problems and studies on this field are increasing [2]. Solid electrolyte material is the critical factor to affect the electrochemical and cycle performances of all-solid-state batteries. For commercial application of all-solid-state batteries, high ionic conductivity and cyclability at room temperature are indispensable. Metal sulfides are in great potential to meet the practical application as solid electrolytes and a series of solid sulfur compounds with high ionic conductivities have been reported [3,4]. In this work, a new material Li17Ge2P3S20 with new crystal structure has been synthesized via a simple solid state reaction. The new structure is detected using XRD patterns as shown in Figure 1. AC impedance has been performed and the ionic conductivity of Li17Ge2P3S20 is determined to be 8.07×10-3 S/cm at room temperature. Experimental parameters have been optimized and elemental doping has been utilized to enhance the conductivity and stability of this material as solid electrolyte for all-solid-state lithium ion batteries. Acknowledgement This work was financially supported by the Shenzhen Peacock Plan (KQCX20140522150815065)，the Natural Science Foundation of Shenzhen ( JCYJ20150331101823677) and the Science and Technology Innovation Foundation for the Undergraduates of SUSTC(2015x19 and 2015x12) References: [1] Etacheri V, Marom R, Elazari R, et al. Challenges in the development of advanced Li-ion batteries: a review[J]. Energy & Environmental Science, 2011, 4(9): 3243-3262. [2] Notten P H L, Roozeboom F, Niessen R A H, et al. 3‐D integrated all‐solid‐state rechargeable batteries[J]. Advanced Materials, 2007, 19(24): 4564-4567. [3] Kamaya N, Homma K, Yamakawa Y, et al. A lithium superionic conductor[J]. Nature materials, 2011, 10(9): 682-686. [4] Kato Y, Hori S, Saito T, et al. High-power all-solid-state batteries using sulfide superionic conductors[J]. Nature Energy, 2016, 1: 16030. Figure 1

Lithium-rich diamond-like solid electrolytes for lithium batteries

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

A Novel Solid Electrolyte Material (li17ge2p3s20) with High Ionic Conductivity

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Designing lithium halide solid electrolytes

One Stone, Three Birds: Cu2+-Substituted Chloride Electrolyte for High-Performance All-Solid-State Lithium Batteries

Achieving fast ionic conductivity and high electrochemical stability through polyhedral structure design

Thiotetrelates Li<sub>2</sub>ZnXS<sub>4</sub> (X = Si, Ge, and Sn) As Potential Li-Ion Solid-State Electrolytes

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

Recent Progress in Sulfide-Based Solid Electrolytes for Li-ion Batteries

High Ion Conducting Solid Composite Electrolytes with Enhanced Interfacial Compatibility for Lithium Metal Batteries

Atomic-level Insights into the Highly Conductive Lithium Thiophosphate Solid Electrolytes with Exceptional Stability Against Lithium Metal

High-Energy-Density Solid-Electrolyte-Based Liquid Li-S and Li-Se Batteries

Thiotetrelates Li 2 ZnXS 4 (X = Si, Ge, and Sn) As Potential Li-Ion Solid-State Electrolytes

Intercalated Electrolyte with High Transference Number for Dendrite‐Free Solid‐State Lithium Batteries

Sulfide Solid Electrolytes for Lithium Battery Applications

The Influence of Organic-Inorganic Composite Solid Electrolytes on Electrochemical Performance in Solid-State Lithium Batteries

Prediction of Novel Trigonal Chloride Superionic Conductors as Promising Solid Electrolytes for All-Solid-State Lithium Batteries

Garnet-type Solid-state Electrolyte Li7La3Zr2O12: Crystal Structure, Element Doping and Interface Strategies for Solid-state Lithium Batteries