Abstract:Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising ecofriendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 +/- 1.3 and 17.3 +/- 6.8 U, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 +/- 0.07 W m-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during longterm operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.(c) 2023 The Authors. Published by Elsevier B.V. on behalf of Chinese Society for Environmental Sciences, Harbin Institute of Technology, Chinese Research Academy of Environmental Sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Bifunctional Quaternary Ammonium Compounds to Inhibit Biofilm Growth and Enhance Performance for Activated Carbon Air-Cathode in Microbial Fuel Cells

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Surface modification by β-cyclodextrin/polyquaternium-11 composite for enhanced biofilm formation in microbial fuel cells

Granular activated carbon assisted biocathode for effective electrotrophic denitrification in microbial fuel cells

Carbon Material Optimized Biocathode for Improving Microbial Fuel Cell Performance

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Simultaneously Enhancing Power Density and Coulombic Efficiency with a Hydrophobic Fe–N4/activated Carbon Air Cathode for Microbial Fuel Cells

Nano-hydroxyapatite/Carbon nanotube: an excellent anode modifying material for improving the power output and diclofenac sodium removal of microbial fuel cells

Cathodic Biofouling Control by Microbial Separators in Air-Breathing Microbial Fuel Cells

Influence of Soluble Microbial Products on the Long-Term Stability of Air Cathodes in Microbial Fuel Cells

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

Inhibition of Microbial Growth on Air Cathodes of Single Chamber Microbial Fuel Cells by Incorporating Enrofloxacin into the Catalyst Layer.

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

The performance of microbial fuel cell with sodium alginate and super activated carbon composite gel modified anode

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

Microwave Preparation of Catalyst Layer for Enhancing the Oxygen Reduction of Air Cathode in Microbial Fuel Cells