Abstract:Day after day the interest in the renewable clean energy is increasing because of the enormous advantages that it has. One of the main forms for the renewable energy is the solar which has been used through power systems such as the Concentrated Solar Power (CSP), which shows a remarkable enhancement recently. The current study examines different arrangements of an open cavity receivers with an aperture area of 0.02835m2 and an average flux values ranged from 2.5 to 15kW/m2. By employing an advanced ray tracing OptisWorks software, which uses the Monte-Carlo ray-tracing technique for predicting the flux distributions, to decrease the optical losses and computational fluid dynamic CFD analysis to minimize the thermal losses, the fluid exit temperature can be maximised. The exact values and distribution of the received irradiance by the surface area of each helical coil, inside the receiver shape, was subsequently transferred and used as an input parameter using the User Defined Function, UDF, in order to numerically simulate the fluid flow and calculate the amount of heat transfer to the working fluid through the CFD analysis. Different scenarios including each, the shape configuration, the reflector diameter, and the helical coil pitch has been intensively carried out in the study. Results showed that compared to 0.5D pitch value, the zero pitch showed better performance in both optically and thermally. Moreover, an enhancement up to around 7% in the overall thermal performance was achieved when the receiver aperture area was covered by glass. Finally, some analysis for closed Brayton cycle was considered and the results showed the 80% overall system efficiency is applicable if there is more than one application is integrated in the system.

PROPOSAL OF THE SHAPE LAYOUT OF TRAPEZOIDAL CAVITY RECEIVER TO IMPROVE THE OPTICAL EFFICIENCY

Design and Optimization of Elliptical Cavity Tube Receivers in the Parabolic Trough Solar Collector

Influence of geometric design variables on the performance of a novel V-shaped cavity receiver

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Optical performance investigation on flat receiver for parabolic trough solar collector based on the MCRT method

Parametric analysis of small scale cavity receiver with optimum shape for solar powered closed Brayton cycle applications

Reticulated Porous Volumetric Solar Receiver Designs Guided by Normal Absorptance and Hemispherical Volumetric Emittance Investigations

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Thermal performance analysis of a novel Conical-Cylindrical-Conical cavity receiver for a Scheffler concentrated solar system

Solar-thermal conversion investigation using surface partition method for a cavity receiver with helical pipe

Optimization of solar receivers for high-temperature solar conversion processes: Direct vs. Indirect illumination designs

Numerical Study on Thermal Performance of a Solar Cavity Receiver with Different Depths

A new methodology of thermal performance improvement and numerical analysis of free-falling particle receiver

Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral

Design and Optimization of Cavity Solar Collector

Effects of surface optical and radiative properties on the thermal performance of a solar cavity receiver

Optimizing Design of the Cat's Eye Cavity in a Nanometer Laser Ruler

An Optimization Method of Asymmetric Resonant Cavities for Unidirectional Emission

An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator

Investigation on structural and optical characteristics for an improved compound parabolic concentrator based on cylindrical absorber