Abstract:In order to achieve uniform laser illumination with small aperture diameter and large field Angle,study laser active illumination <a class="link-external link-http" href="http://system.An" rel="external noopener nofollow">this http URL</a> aspheric mirror combined with a composite ellipsoidal cavity is designed to achieve uniform illumination in this paper.Through an aspheric mirror,the fundamental mode of Gaussian beam is shaped into double Gaussian radiation and Flat-top radiation.The double Gaussian radiation rays are reflected again by the complex ellipsoidal cavity and decomposed into equal radiation flux,which is superimposed with the through Flat-top radiation rays to form a uniform distribution.The parameters of the complex ellipsoidal cavity are obtained by mapping equalization algorithm.After the superposition of the aspherical transmission Flat-top shaping and the composite ellipsoidal cavity secondary reflection shaping,the aperture is 29.7mm,whose aperture angle is 84.0 degrees,and the uniformity is 92.7% with 2m distance and 3.6m diameter.The optimization of uniformity is influenced by three factors:RMS,transmission and reflection power density ratio MT/R and transmission and reflection overlap degree.RMS and MT/R determine the design effect of the composite ellipsoidal cavity, which depends on the maximum reflection Angle and transmission <a class="link-external link-http" href="http://Angle.MT/R" rel="external noopener nofollow">this http URL</a> is negatively correlated with the maximum reflection of Angle,and RMS is positively correlated with the transmission Angle.When the maximum reflection Angle is set to 32.0 degrees and the transmission Angle to 8.0 degrees,the minimum root-mean-square focusing radius is 108.6um,and the minimum effective transmission reflection power density ratio is 1.07.The degree overlap of transmission and reflection directly affects the uniformity of the target plane.The degree of transmission and reflection is adjusted by setting an adjustment factor.When the adjustment factor is 0.9,the uniformity of the target plane reaches the maximum.

Optimizing Design of the Cat's Eye Cavity in a Nanometer Laser Ruler

Theoretic Analysis of the Cat’s Eye Cavity He-Ne Laser

Angular characters of enhanced resonance in an active microcavity embedded in dielectric Bragg reflectors

Misalignment sensitivity of the cat’s eye cavity He–Ne laser

Enhancing the field of view of cat-eye retroreflectors by simply matching the mirror radius of curvature and the lens focal length

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Enhancing the field of view of a distributed-cavity laser incorporating cat-eye optics by compensating the field-curvature

Using a cat's eye cavity to improve displacement self-sensing laser

Application of Cat's Eye Resonator in Long Full-External He-Ne Lasers

Ultra Stable and Adjustment-Free "cat's Eye" Cavity He-Ne Laser

Adjustment-Free Cat'S Eye Cavity He-Ne Laser And Its Outstanding Stability

Adjustment-Free Long-Distributed-Cavity Laser Using Small Glass Ball Cat-Eye Retroreflector

New Laser Transverse Mode Demonstration System Based on Loss Adjustment of a Cat-Eye Reflector

Research of the Laser Transverse Mode Modulated by the Cat's Eye Resonator

Design of L-cavity using refractive and reflective elements

Simple Method of Optical Ring Cavity Design and Its Applications.

Design of laser uniform illumination system based on aspheric lens and compound ellipsoidal cavity

Optimization method to eliminate the influence of the conical acoustic lens on the transmission of laser beam using ZEMAX

Control of transverse mode pattern in a helium–neon laser using the cat’s eye cavity

Low Noise Near-Concentric Optical Cavity Design

Practical Design of Resonant Cavity for a RF Free Electron Laser