Abstract:Stability of a bulk-optical resonator is a very important factor in the cavity analysis. The stability of a resonator depends on the properties and arrangement of the optical components, basically the curvature of reflecting surfaces, other focusing effects, and the distances between the components. When a parameter such as cavity length or the radius of curvature of the focusing element in the resonator is varied, the cavity stability also changes. This paper presents a concise and very simplified design and modeling of a 'L' shaped cavity, with reflecting and refracting elements along with two curved mirrors (cavity mirrors) using ABCD matrix and also the importance of an optical element used in L-cavity. The stability is calculated from the ABCD matrix and analyzed using cavity parameters like cavity length and radius of curvature. The stability of the L-cavity is analyzed by varying the length of the cavity from 100 mm to 1500 mm. The L-cavity is stable up to 1500 mm for mirror as intra cavity element and is stable beyond 1500 mm also for TIR (Total internal reflection) prism as intra cavity element. Similarly, the radius of curvatures of mirror and prism also varied from 100 mm to 2500 mm. The L-cavity is stable from 300 mm in mirror case and further also. The L-cavity is stable from 100 mm in TIR prism case and further also. The power distribution of laser beam is also simulated and analyzed for both mirror and TIR prism L-cavity using ZEMAX tool in non sequential mode. From the stability point and other properties of an optical element used in the L-cavity, the importance of the mirror and TIR prism is also studied and also which optical element is preferred for further ring cavity applications.

Design of L-cavity using refractive and reflective elements

Angular characters of enhanced resonance in an active microcavity embedded in dielectric Bragg reflectors

Optimizing Design of the Cat's Eye Cavity in a Nanometer Laser Ruler

Simple Method of Optical Ring Cavity Design and Its Applications.

Low Noise Near-Concentric Optical Cavity Design

The Research on Improving the Characteristics of Laser Output with Diffractive Optical Elements

Resonant behavior and stability of a linear three-mirror cavity

Design studies for distributed Bragg reflectors for short-cavity edge-emitting lasers

Spatial Chirp And Angular Dispersion Of A Laser Crystal For A Four-Mirror Cavity Kerr-Lens Mode-Locked Laser

Numerical investigation of V shaped three elements resonator for optical closed loop system

Design of Synthesized DBRs for Long-Wavelength InP-Based Vertical-Cavity Surface-Emitting Lasers

Theoretic Analysis of the Cat’s Eye Cavity He-Ne Laser

Design of Photonic Crystal Micro-mirrors in Ring Resonant Cavity

High-quality-factor planar optical cavities with laterally stopped, slowed, or reversed light

Research on the Radial Polarization Laser Reflection Cavity Mirror

High Finesse Fiber Fabry-Perot Cavities: Stabilization and Mode Matching Analysis

Design and Analysis of Novel Folded Optical Multi-Pass Cell

Design of a transportable miniaturized optical reference cavity with flexibly tunable thermal expansion properties

Numerical simulation of laser beam interaction with a liquid crystal medium in a miniature fiber-optical system

R & D of High-Power Optical Cavity at Tsinghua

Analysis of optical resonant cavity composed of nonparallel reflectors