Abstract:The evolution of surface morphologies of films prepared by ion-based deposition techniques has been investigated by atomic force microscopy. Two deposition processes, filtered arc deposition (FAD) and ion-beam-assisted deposition, where low-energy (<100 eV) ion irradiation and high-energy (several tens of keV) ion-beam bombardment concurrent with film growth were involved, respectively, have been employed to prepare TiN and Al films. Comparative studies on the effect of energetic ions on the development of topography have been performed between the low-ion-energy regime and high-ion-energy regime. In addition, the relationship between topography and mechanical properties of thin films has been revealed, by involving thin films prepared by thermal evaporation deposition (TED), where almost all depositing particles are neutral. In the images of the TED TiN and Al films, a large number of porous and deep boundaries between columnar grains was observed, suggesting a very rough and loose surface. In contrast, the FAD films exhibited much denser surface morphologies, although still columnar. The root-mean-square roughness of the FAD films was less than 1 Å. Hardness test and optical parameter measurement indicated that the FAD films were much harder and, in the case of optical films, much more transparent than the TED films, which was considered to arise from the denser surface morphologies rather than crystallization of the films. The high density and super smoothness of the FAD films, and the resultant mechanical and optical properties superior to those of the TED films, were attributed to the enhancement of surface migration of the deposited adatoms in the FAD process, which could provide intensive low-energy ion irradiation during film growth. As for topography modification by high-energy ion-beam bombardment concurrent with film growth, in addition to the increase of surface diffusion due to elastic collision and thermal spikes, physical sputtering must be considered while explaining the development of the film topography. Both surface migration enhancement and sputtering played important roles in the case of high-energy heavy-ion-beam bombardment, under which condition surface morphology characterized by dense columns with larger dimension and deep clean boundaries was formed. However, under high-energy light-ion-beam bombardment, the sputtering was dominant, and the variation of sputtering coefficient with position on the surface of growing film led to the formation of cones.

Surface Morphologies of Pulsed Laser Deposited Ultra-Thin Diamond-like Carbon Films

Preparation of Anti-Reflective and Protective Diamond-Like Carbon Film on Si Substrate by Femto-Second Pulsed Laser Deposition

AFM Observation and Application of Diamond-Like Carbon Films

A review on diamond-like carbon films grown by pulsed laser deposition

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Micro-hardness and adhesion of diamond-like carbon films

Morphologies and structures of chemical vapor deposited diamond films and film-substrate interfaces

Tribological Properties Of Diamond-Like Carbon-Films Deposited On Silicon Using Rf Plasma-Enhanced Cvd

Atomic Force Microscopy Study on Topography of Films Produced by Ion-Based Techniques

Deposition of nano-diamond-like carbon films by an atmospheric pressure plasma gun and diagnostic by optical emission spectrum on the process

Properties of DLC Films Produced by Pulsed Laser Induced Arc Deposition

Pulsed Laser Deposition of Diamond-Like Carbon Films under a Magnetic Field

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Growth of well-adhered and smooth diamond thin films on fused silica substrates

Electron-Beam Defined Delamination and Ablation of Carbon-Diamond Thin-Films on Silicon

Structural and Tribological Properties of Diamond-Like Nanocomposite Thin Films

Surface Roughness Effects on the Properties of Silicon-Doped Diamond-like Carbon Coatings

Diamond-like Carbon Thin Films Prepared by ECR Argon Plasma Assisted Pulsed Laser Deposition

DEPOSITION OF DIAMOND-LIKE AND OTHER SPECIAL COATINGS BY PULSED LASER ABLATION AND THEIR POST-SYNTHESIS PROCESSING

Pulsed-laser deposition of diamond-like carbon: Relations between laser fluence, velocity of carbon ions, and bonding in the films

Study on the Optical Properties of Amorphous Carbon Films Deposited by Low-energy Pulsed Laser