Abstract:Most present demonstrations of high-temperature superconducting (HTS) synchronous motors/generators are partially superconducting, only installing HTS coils on the rotor as excitation windings. The possible applicability of HTS armature windings is an interesting research topic because these windings can certainly increase the power density attributed to a potentially high armature loading capacity. In this study, we analysed the thermal behaviours of a developed 2.5 kW–300 rpm synchronous generator prototype that consists of an HTS stator with Bi-2223–Ag armature windings on an iron core and a permanent magnet (PM) rotor. The entire HTS stator, including the iron core, is cooled with liquid nitrogen through conduction cooling. The rated frequency is set at 10 Hz to reduce AC loss. The properties of the HTS windings and the iron core are characterized, and the temperatures in the HTS stator under different operation conditions are measured. The estimated iron loss is 11.5 W under operation in 10 Hz at liquid nitrogen temperature. Conduction cooling through the silicon iron core is sufficient to cool the iron core and to compensate for the temperature increment caused by iron loss. The stable running capacity is limited to 1.6 kW when the armature current is 12.6 A (effective values) due to the increasing temperature in the slots as a result of the AC loss in the HTS coils. The thermal contact between the HTS coils and the cooling media should be improved in the future to take away the heat generated by AC loss.

A Measurement Testing Setup of the Characteristic Properties for High Temperature Superconducting bearing Systems

Calculation and Measurement of the Magnetic Field of Nd2Fe14B Magnets for High-Temperature Superconducting Magnetic Bearing Rotor

Static Behavior of a Complex High Temperature Superconductor Thrust Bearings

Levitation forces of an uncentralized high temperature superconductor thrust bearings

Development of Testing Device for Critical Current Measurements for HTS/LTS

RETRACTED: Development of a Cryogenic Test Bed for High Amperage Critical Current Measurement on High Temperature Superconductor Wire

Development Status and Prospects of High-Tc Superconducting Magnetic Bearing

Effect of permanent magnet's structure on static behavior of a superconducting thrust bearing

Simulation and Test for the Thermal Behaviour of a Prototype Synchronous Generator with HTS Armature Windings

Novel Test Method for AC Current-Carrying Capability in the Consideration of Alternating Magnetic Field

Stability Of Properties On Magnetic Ribbon And Cores With Domestic Fe-Based Amorphous Alloy For Hts Amdt

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Design and Key Performance of 2G HTS Coils for High Speed Superconducting Maglev Application

Design for In-Field Critical Current Measurement System With 102 Mm 15 T Background Magnet

A Method for Continuous Measurement of Critical Current of HTS Tapes Using Magnetic Circuits

Sensitivity Analysis of Rotor Parameters in Axially Magnetized Radial HTS Magnetic Bearings Using an Analytical Method

Measurement of the Transition Temperature Distribution and Magnetic Field Profile of Large Superconducting Films

Control and Operation of A High Temperature Superconducting Synchronous Motor

Development and Testing of A 2.5 Kw Synchronous Generator with A High Temperature Superconducting Stator and Permanent Magnet Rotor

Anisotropy Effect on Levitation Performance of Bulk High-Tc Superconductors above a Permanent Magnet Guideway

Characterization and Improvement of Axial and Radial Stiffness of Contactless Thrust Superconducting Magnetic Bearings