Abstract:Regenerative cooling of the high-temperature components in propulsion and power-generation systems plays a paramount role in maintaining the reliability and durability of the systems. In this paper, a mathematical model is developed for studying fluid dynamics and heat-transfer characteristics of the aviation kerosene RP-3 at supercritical pressures. The model accommodates a detailed pyrolytic chemical reaction mechanism, which consists of 18 species and 24 elementary reactions (Jiang, R.; Liu, G.; Zhang, X. Thermal cracking of hydrocarbon aviation fuels in regenerative cooling microchannels. Energy Fuels 2013, 27, 2563-2577). Accurate calculations of thermophysical properties at supercritical pressures are properly incorporated. After rigorous model validations, numerical studies of turbulent heat transfer of RP-3 in a micro cooling tube at a supercritical pressure of 5 MPa are conducted under operating conditions of both constant wall heat flux and constant surface temperature to obtain a fundamental understanding of the complex physicochemical processes. Results indicate that the endothermic fuel pyrolysis, which prevails once the bulk fluid temperature rises above 750 K, dictates the fluid flow and heat-transfer process in the high fluid temperature region. Significant variations of the fluid thermophysical properties also make strong impacts; two scenarios of heat-transfer enhancement resulting from property variations under the tested conditions are analyzed. This work has fundamental and practical implications for effective thermal management in propulsion and power-generation systems.

Isobaric Specific Heat Capacity Measurement for Kerosene Rp-3 in the Near-Critical and Supercritical Regions

Novel Measurement of Isobaric Specific Heat Capacity for Kerosene Rp-3 at High Temperature and High Pressure

Isobaric Specific Heat Capacities of Emulsified Kerosene at High Temperature and Pressure

Measurement of Isobaric Specific Heat of Emulsified Kerosene at Supercritical Pressure

Enthalpy Measurement and Heat Transfer Investigation of RP-3 Kerosene at Supercritical Pressure

Thermal-Conductivity Measurements of Aviation Kerosene Rp-3 from (285 to 513) K at Sub- and Supercritical Pressures

Density Measurements of Endothermic Hydrocarbon Fuel at Sub- and Supercritical Conditions

Measurements of the Isobaric Heat Capacity of Pressurized Liquid Trans-1,3,3,3-tetrafluoropropene [r1234ze(e)] by Scanning Calorimetry

HEAT TRANSFER CHARACTERISTICS OF RP-3 KEROSENE AT SUPERCRITICAL PRESSURE IN A VERTICAL CIRCULAR TUBE

Design of A Flow Calorimeter for Hydrocarbon Fuel at Temperatures from (330 to 900) K and Pressures Up to 6.0 Mpa

Viscosity Measurements of Endothermic Hydrocarbon Fuel from (298 to 788) K under Supercritical Pressure Conditions

Analyses of Surrogate Models for Calculating Thermophysical Properties of Aviation Kerosene RP-3 at Supercritical Pressures

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

On-line Measurement of Isobaric Specific Heat Capacity for Endothermic Hydrocarbon Fuel at High Temperature

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Numerical investigation of heat transfer characteristics and flow resistance of kerosene RP-3 under supercritical pressure

Heat Transfer of Aviation Kerosene at Supercritical Conditions

Flow frictional resistance characteristics of kerosene RP-3 in horizontal circular tube at supercritical pressure

Modified K-Epsilon Model For Rp-3 Kerosene In A Horizontal Circular Tube At Supercritical Pressure

Numerical Study of Heat Transfer of RP-3 at Supercritical Pressure