Abstract:The interface properties between surface grown carbon nanotubes carbon fiber (CNTs‐CF) and epoxy resin were investigated by different modification methods. The X‐ray photoelectron spectrometer probations show that the pristine CNTs‐CF has very low contents of both oxygen element and active carbon element. Taking the naked carbon fiber (CF) without CNTs grown as a reference, the interfacial shear strength (IFSS) of CNTs‐CF/epoxy is only 5.6% higher. After heat treatment, chemical modification and sizing treatments, the surface chemical activity of CNTs‐CF is improved considerably. In contrast with the IFSS of standard CF/epoxy, the interfacial strength of chemical‐treated CNTs‐CF‐E1/epoxy is increased to 122.8 MPa by 29.7%. The increasing content of the epoxy active groups at the modified CNTs‐CF‐E1 surface is conducive to forming covalent bonds between the epoxy resin and the CNTs‐CF‐E1 surface particularly the activated nanotube surface. The enhancement of CNT/epoxy interface is beneficial to the over whole interface property of the composites. Hence, the compressive and torsion strength of sizing CNTs‐CF‐E1 bundle combined with epoxy resin are increased by 32.4% and 14.1%, respectively. The SEM images show the failure morphologies of different modification methods, and the enhancement mechanism of multiscale interface is further clarified. Compared with chemical treatment, heat treatment can remove the inert amorphous carbon on the CNTs‐CF fiber surface and improve the interface adhesion of CNT/epoxy and CF/epoxy, and surface sizing treatment improves the CF/epoxy interface. The enhancement mechanisms of these modified CNTs‐CFs/epoxy should be ascribed to the competition and synergetic effects of the multiscale interfaces, including CNT/CF, CNT/epoxy, and CF/epoxy.

Improved Tensile Properties of Carbon Nanotube Modified Epoxy and Its Continuous Carbon Fiber Reinforced Composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Study on Mechanical Properties of Carbon Nanotube Reinforced Carbon Fiber/ Epoxy Resin Composites

Study on properties of carbon nanotubes/epoxy resin composite prepared by in-situ polymerization

Carbon Nanotube Film/Epoxy Composites with High Strength and Toughness

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites

Mechanical Properties of Carbon Nanotube Fibers Reinforced Epoxy Resin Composite Films Prepared by Wet Winding

Interfacial Modification and Enhancement of Toughening Mechanisms in Epoxy Composites with CNTs Grafted on Carbon Fibers

Interfacial Properties Improvement of Carbon Fiber Reinforced Epoxy Composites Modified with Carbon Nanotubes

Study on Properties of Carbon Nanotubes/Epoxy Resin Composite Prepared by <i>In Situ</i> Polymerization

Carbon Nanotube/Epoxy Composites Fabricated by Resin Transfer Molding

Covalent Incorporation of Aminated Carbon Nanotubes into Epoxy Resin Network

Tensile Mechanical Behaviors of High Loading of Carbon Nanotube/Epoxy Composites via Experimental and Finite Element Analysis

Dramatic Increase in Electrical Conductivity in Epoxy Composites with Uni-Directionally Oriented Laminae of Carbon Nanotubes

Improving interfacial and mechanical properties of epoxy resin composites by chemical grafting modification of poly‐ether‐ether‐ketone microparticles with carbon nanotubes

Improving Tensile Properties of Double-Walled Carbon Nanotube Strands by Intercalation of Epoxy Resin

High-strength and toughness carbon nanotube fiber/resin composites by controllable wet-stretching and stepped pressing

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Significant improvements in the mechanical properties of chitosan functionalized carbon nanotubes/epoxy composites

Recent Advances in Carbon-Nanotube-Based Epoxy Composites