Abstract:Piezoelectric composites made of piezoelectric ceramic particles and polymer composites combine the performance advantages of both components and have broad application prospects. However, the preparation of complex structures is still a challenge, for which 3D printing technology provides a perfect solution. The aim of the present study is to investigate the principle and process optimization of the stereolithography of 0–3 type piezoelectric composites through simulation and experiments. In particular, a modified three-phase model of a spherical shell is applied to elucidate the influence of the elastic modulus between the ceramic particles and the matrix on the piezoelectric properties of the composites at the macroscopic level. This enables the piezoelectric properties of the composites to be predicted more accurately, and guides the surface grafting modification of piezoelectric ceramic powders. Furthermore, the problem of weak interface bonding in piezoelectric composites caused by poor compatibility between hydrophilic particles and the hydrophobic matrix is successfully solved by preprocessing the PZT ceramic powder via activating the particle surface hydroxyl groups and grafting a silane coupling agent onto the piezoelectric ceramic powder. As a result, the particles are bonded to the matrix by covalent bonds, which increases the elastic modulus of the interface transition layer and modifies the stress transfer efficiency. For instance, the piezoelectric strain constant ( d 33 ) of piezoelectric composite containing 60 wt% functionalized PZT particles is increased from 20 to 37 pC/N. The printing accuracy, piezoelectric properties, and mechanical characteristics of the piezoelectric composites are thoroughly investigated, and the reliability of the proposed theoretical model and simulation results is verified. The piezoelectric composites are uniformly compact and have a low residual pore rate. The piezoelectric composite with a solid content of 60 wt% has a volume density of 2.27 g/cm3 and a Young's modulus of 535.44 MPa. Most importantly, its piezoelectric voltage constant ( g 33 ) is 167.2 × 10−3 Vm/N, which is more than seven times higher than that of homogeneous PZT and results in high voltage sensitivity.

Research on the electro‐elastic properties of the 2‐1‐3 (a revised version of 1‐3‐2) piezoelectric composite by finite element method

Analysis of electromechanical characteristics of the 1-3-2 piezoelectric composite and 1-3-2 modified structural material

Performance comparison of 2-1-3, 1-3 and 1-3-2 piezoelectric composite transducers by finite element method

Effect of Filling Material Properties on 1–3 Piezoelectric Composite Performance

Mechanical clamping by inverse piezoelectric effect to improve the electromechanical coupling effect of a 1-3 PZT/P(VDF-TrFE) composite sheet

Characterization of 0–3 piezoelectric polymer composites using FEA for biomedical transducers applications

1-3-Type piezoelectric composites with three-layer cascade structure

Electromechanical Properties and Temperature Stability of 1-3 Type PZT/Epoxy Piezoelectric Composite

Electrical and Elastic Properties of 1–3 PZT/epoxy Piezoelectric Composites

Electric properties of single-crystal PMN-31% PT/epoxy 1-3 piezoelectric composites

Performance of 3 1 Type PZT/epoxy Composites Compared with 3 1 Type PZT/air Composites

New 1-3 type piezoelectric composite material for kilohertz frequency range transducers

FABRICATION AND PROPERTIES OF FINE SCALE 1-3 PZT/EPOXY PIEZOELECTRIC COMPOSITES

Effective Piezoelectric Coefficients of Cement-Based 2–2 Type Piezoelectric Composites Based on a Multiscale Homogenization Model

3D printed 0–3 type piezoelectric composites with high voltage sensitivity

Study on the properties of 2-2 type piezoelectric composite using thickness-shear mode

Design and study on a 1–3 anisotropy piezocomposite sensor

Dynamic Properties of Fine-Scale 1-3 PZT/Epoxy Piezoelectric Composites

Piezoelectric Properties of PVDF Modified 3-3 Type Cement-Based Piezoelectric Composites

Theoretical Research On Active Sound Absorption Of 1-3 Piezoelectric Composites Based On Equal Strain Model

The electromechanical coupling property and vibration behavior in 1-3 type piezoelectric composites