Abstract:For the applications of underwater acoustics and ultrasonics, the 1-3 piezoelectric composite has proven to be useful material given its attractive performance. As a special modified version of 1-3 composite, the 1-3-2 piezoelectric composite which is composed of 1-3 composite and a ceramic base layer has been studied a lot recently for getting greater stability than 1-3 composite. But there still exist shortcomings caused by limitations in the manufacturing process of both 1-3 and 1-3-2 piezoelectric composites. In this article, a 2-3 composite that consists of 1-3 composite and a ceramic cover layer instead of the ceramic base layer for 1-3-2 composite is proposed to loosen the fineness requirement of 1-3 or 1-3-2 composites in the manufacturing process. The finite element method (FEM) has been adopted to analyze the dependence of electric-elastic properties (the longitudinal velocity and thickness electromechanical coupling coefficient) of 13, 1-3-2, and 2-1-3 composites on the aspect ratio a (the ratio of the lateral periodicity of PZT rods to the thickness of composite). The results of the 2-1-3 composite with soft matrix show great improvement in loosening the fineness requirement of the manufacturing. Typically, the fineness of 30%-volume faction 2-1-3 composite can be reduced to 2.54% of that of 1-3-2 composite. Hence, the 2-1-3 composite offers greater feasibility for the design of various sensing materials. (C) 2015 Society of Plastics Engineers

Analysis of electromechanical characteristics of the 1-3-2 piezoelectric composite and 1-3-2 modified structural material

Research on the electro‐elastic properties of the 2‐1‐3 (a revised version of 1‐3‐2) piezoelectric composite by finite element method

Effect of Filling Material Properties on 1–3 Piezoelectric Composite Performance

The electromechanical coupling property and vibration behavior in 1-3 type piezoelectric composites

Performance comparison of 2-1-3, 1-3 and 1-3-2 piezoelectric composite transducers by finite element method

Mechanical clamping by inverse piezoelectric effect to improve the electromechanical coupling effect of a 1-3 PZT/P(VDF-TrFE) composite sheet

1-3-Type piezoelectric composites with three-layer cascade structure

Parametric Analysis and Optimization of Radially Layered Cylindrical Piezoceramic/Epoxy Composite Transducers

Study on the properties of 2-2 type piezoelectric composite using thickness-shear mode

Characterization of 0–3 piezoelectric polymer composites using FEA for biomedical transducers applications

Structural Optimization of Piezoelectric and Piezomagnetic Composite Materials based on the Coupled Vibration Modes

Research, design, and analysis of a stacked piezoelectric metamaterial structured sensitive element

Acoustic excitation of piezoelectric composite material

Effective Piezoelectric Coefficients of Cement-Based 2–2 Type Piezoelectric Composites Based on a Multiscale Homogenization Model

Research on Effective Electric-Mechanical Coupling Coefficient of Sandwich Type Piezoelectric Ultrasonic Transducer Using Bending Vibration Mode

Design and study on a 1–3 anisotropy piezocomposite sensor

Analysis on coupled vibration of piezoelectric ceramic stack with two piezoelectric ceramic elements.

Study of 1-3-2 type piezoelectric composite transducer array

Research on the Characteristics of High-Performance Textured Ceramic Materials and Their Application in Composite Rod Transducers

Enhanced electromechanical coupling in Pb(ZrTi)O3 piezoelectric composite via poly(vinylidene fluoride‐trifluoroethylene) clamping

Theoretical Research On Active Sound Absorption Of 1-3 Piezoelectric Composites Based On Equal Strain Model