Abstract:Anisotropic strain sensors are crucial to accurately detecting the complex strain states in wearable devices and robotics. Large directional sensitivity differences are the key for strain sensors to differentiate loading directions. Here, an ultrasensitive anisotropic strain sensor consisting of orthogonal heterogeneous piezo-resistive composite (HePC) and homogenous piezo-resistive composite (HoPC) is demonstrated for loading direction perception. Benefited by a unique stiff-soft-stiff segment structure design, the HePCs with ultrahigh strain sensitivity were fabricated with carbon black (CB)/silicone nanocomposite with a low Young's modulus as the soft segment (SoS) and carbon-fiber-reinforced CB/silicone nanocomposite with a high Young's modulus as the stiff segment (StS). The HePC with a length ratio (LStS/LSoS) of 14:1 offers an average gauge factor of 70 (ε < 1%), which is increased more than 60 times than that of HoPC, due to the strain concentration effect in the SoS of HePC. Moreover, the anisotropic strain sensor fabricated demonstrates significant directional sensitivity differences due to the heterogeneous structure, and their relative resistance changes (RCR) vary considerably from positive to negative upon the change of loading directions. This makes the sensor highly effective to distinguish strain magnitude and direction simultaneously, and succeeding in monitoring complex human body gestures. Meanwhile, the relation between the loading direction and the measured parameter K (RCR in X-direction over that in Y-direction) is proposed to predict the loading angle. Considering its ultrahigh sensitivity and loading-direction-perception capability, the anisotropic strain sensor with the heterogeneous structure of stiff-soft-stiff segments is promising in wearable devices, robotic systems, artificial intelligence, etc.

Design and study on a 1–3 anisotropy piezocomposite sensor

Research on 1-3 Orthogonal Anisotropic Piezoelectric Composite Material Sensors

Optimization of Polarization Direction on 3D Printed 3-3 Piezoelectric Composites for Sensing Application

Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response

Three-dimensional Piezo-Thermo-mechanical Analysis for a Finite Cylindrical Composite Panel Composed of Cross-Ply and Piezoelectric Laminate

Research on the electro‐elastic properties of the 2‐1‐3 (a revised version of 1‐3‐2) piezoelectric composite by finite element method

Characterization of the Performance of 1–3 Type Piezocomposites for Low-Frequency Applications

Computation-guided Design of Flexible Piezoelectric Composites by Optimizing Charge-Stress Transmission

Two orientation effects and large anisotropy of parameters in piezo-active 2–1–2 composites based on [0 1 1]-poled crystals

Modulating piezoelectricity and mechanical strength via three-dimensional gradient structure for piezoelectric composites

Theoretical-Study On The Static Performance Of Piezoelectric Ceramic-Polymer Composites With 1-3 Connectivity

Numerical Analysis and Optimization on Piezoelectric Properties of 0–3 Type Piezoelectric Cement-Based Materials with Interdigitated Electrodes

Analysis of electromechanical characteristics of the 1-3-2 piezoelectric composite and 1-3-2 modified structural material

A Study of Three-Dimensional Four-Step Braided Piezo-Ceramic Composites by the Homogenization Method

Heterogeneous carbon/silicone composite for ultrasensitive anisotropic strain sensor with loading-direction-perception capability

Architectural design of flexible anisotropic piezoresistive composite for multiple-loading recognization

Effect of Aligning Conductive Particles on the Piezoresistivity of Composites

3D Printing-Induced Hierarchically Aligned Nanocomposites With Exceptional Multidirectional Strain Sensing Performance

Optimizing the Strain-Sensing Property of Cement-Based Composite Based on a Piezoresisitivity Model

Anisotropic Piezoresistive Sensors Made with Magnetically Induced Vertically Aligned Carbon Nanotubes/Polydimethylsiloxane

Ultra-High Sensitivity Anisotropic Piezoelectric Sensors for Structural Health Monitoring and Robotic Perception