Abstract:In this study, a high-Tg aerospace-grade epoxy composite plate was co-curing welded using a unidirectional PEEK thermoplastic carbon fibre tape to develop advanced composite joints. To account for the surface roughness and the weldability of carbon-epoxy/carbon-PEEK composites, plasma treatments were performed. The co-curing was conducted by the following steps: each treated thermoplastic tape was first placed in the mould, and followed by nine layers of dry-woven carbon fabrics. The mould was sealed using a vacuum bag, and a bi-component thermoset (RTM6) impregnated the preform. To understand the role of curing kinetics, post-curing, curing temperature, and dwell time on the quality of joints, five cure cycles were programmed. The strengths of the welded joints were investigated via the interlayer peeling test. Furthermore, cross-sections of welded zones were assessed using scanning electron microscopy in terms of the morphology of the PEEK/epoxy interphase after co-curing. The preliminary results showed that the cure cycle is an important controlling parameter for crack propagation. A noticeable distinction was evident between the samples cured first at 140 °C for 2 h and then at 180 °C for 2 h, and those cured initially at 150 °C for 2 h followed by 180 °C for 2 h. In other words, the samples subjected to the latter curing conditions exhibited consistently reproducible results with minimal errors compared to different samples. The reduced errors confirmed the reproducibility of these samples, indicating that the adhesion between CF/PEEK and CF/RTM6 tends to be more stable in this curing scenario.

Investigation of Curing Characteristics of Carbon Fiber/epoxy Composites Cured with Low‐energy Electron Beam

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

Investigation on low temperature curing LT-02 epoxy matrix composite

Electron Beam Curing of Advanced Composites

Study on the process of EB curing epoxy matrix composites

Study On The Post-Cure Kinetics Of Epoxy Resin Irradiated By An Electron Beam

Investigation of EBC Polymer Coating Using a Monoenergetic Positron Beam

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Static in-situ curing characteristics of CFRP based on near infrared laser

Influences of Molecular Weight on Curing Effect of Epoxy Resin Irradiated by Electron Beam

Effect of Microwave Curing Process on the Flexural Strength and Interlaminar Shear Strength of Carbon Fiber/bismaleimide Composites

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Study on the Electron Beam Curing Composites Reinforced by AS4 Carbon Fiber

Optimization of a high-pressure microwave curing process for T800/X850 carbon fiber-reinforced plastic

Investigation on a Novel Low Temperature/Vacuum Bag Cure Prepreg

Factors Influencing EB Curing of Epoxy Matrix

Study on the heating mechanism and macro/micro properties of composite materials under microwave curing

Improvement of the Compressive Strength of Carbon Fiber/Epoxy Composites Via Microwave Curing

On the Analyses of Cure Cycle Effects on Peel Strength Characteristics in Carbon High- Tg Epoxy/Plasma-Activated Carbon PEEK Composite Interfaces: A Preliminary Inquiry

Effect of energy on rapid curing of carbon fiber reinforced composites