Abstract:For rubber-like materials, there are three popular methods of equibiaxial tension available: inflation tension, equibiaxial planar tension, and radial tension. However, no studies have addressed the accuracy and comparability of these tests. In this work, we model the tension tests for a hyperelastic electroactive polymer (EAP) membrane material using finite element method (FEM) and investigate their experimental accuracy. This study also analyzes the impact of apparatus structure parameters and specimen dimensions on experimental performances. Additionally, a tensile efficiency is proposed to assess non-uniform deformation in equibiaxial planar tension and radial tension tests. The sample points for calculating deformation in inflation tensions should be taken near the top of the inflated balloon to obtain a more accurate characteristic curve; the deformation simulation range will be constrained by the material model and its parameters within a specific limit (λ ≈ 1.9); if the inflation hole size is halved, the required air pressure must be doubled to maintain equivalent stress and strain values, resulting in a reduction in half in inflation height and decreased accuracy. The equibiaxial planar tension test can enhance uniform deformation and reduce stress errors to as low as 2.1% (at λ = 4) with single-corner-point tension. For circular diaphragm specimens in radial tension tests, increasing the number of cuts and using larger punched holes results in more uniform deformation and less stress error, with a minimum value of 3.83% achieved for a specimen with 24 cuts and a 5 mm punched hole. In terms of tensile efficiency, increasing the number of tensile points in the equibiaxial planar tension test can improve it; under radial tension, increasing the number of cuts and decreasing the diameter of the punched hole on the specimen has a hedging effect. The findings of this study are valuable for accurately evaluating various equibiaxial tension methods and analyzing their precision, as well as providing sound guidance for the effective design of testing apparatus and test plans.

A complete three-dimensional finite element analysis of the bar-bar tensile impact apparatus

T-element based on vector form intrinsic fininte element and its application to tensile cable-membrane structures

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

A FIBER BEAM ELEMENT FOR THE FINITE PARTICLE METHOD CONSIDERING SHEAR AND TORSION DEFORMATON

Finite Particle Method for Kinematically Indeterminate Bar Assemblies

Biaxial Tension Test of Soft Materials

Dynamic Testing of Materials with the Rotating Disk Indirect Bar-Bar Tensile Impact Apparatus

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Application of Smeared Cracking and Damaged Plasticity Models in FEA of CFT

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Mechanism Analysis and Design of Novel Tapered Iron Bolt Shear Connectors

Numerical Analysis of Effect of Specimen's Geometric Size and Bar's Material on Testing Result for CCCD-SHPB Dynamic Fracture Test System

Three-dimensional numerical simulation of dynamic strength and failure mode of a rock mass with cross joints

Effect of the Geometric Shapes of Specimens on Impact Tensile Tests

Simulation Analysis of Equibiaxial Tension Tests for Rubber-like Materials

Three-Dimensional Nonlinear Finite Element Modeling for Bond Performance of Ribbed Steel Bars in Concrete Under Lateral Tensions

Finite Element Modeling of Tensile Instability of Sheet Metals Considering Nonuniform Mechanical Properties

Modeling of the ductile damage – Application for bar shearing

A Finite Element Analysis for Using Brazilian Disk in Split Hopkinson Pressure Bar to Investigate Dynamic Fracture Behavior of Brittle Polymer Materials

A NOVEL AUGMENTED FINITE ELEMENT METHOD FOR NONLINEAR FRACTURE IN ELASTOPLASTIC BARS

Direct dynamic tensile study of concrete materials based on mesoscale model