Abstract:Purpose The purpose of this paper is to systematically investigate the dynamic strain aging (DSA) effect in solid solution treated IN718 at different temperatures through experiments and simulations to gain an understanding of the inelastic deformation mechanisms. Design/methodology/approach In the present work, uniaxial tensile tests have been carried out in conjunction with finite element (FE) simulations to investigate the behaviour of the solid solution treated Inconel 718 superalloy at different temperatures and strain rates. Dynamic strain aging (DSA) effects, which manifested during the tests in the form of a negative strain rate sensitivity and stress serrations, are investigated. The most significant DSA effect occurs at 500°C and at a strain rate of 10–4 s-1. In a newly proposed rate-dependent constitutive formulation, the DSA model, proposed by McCormick, Kubin and Estrin, was introduced into slip-assisted solute hardening, and an activation energy-dependent exponential flow rule was adopted. Findings The observed negative strain rate sensitivity and stress serrations are well predicted by a 3 D FE. The FE results indicate that the equivalent plastic strain rate distribution in the specimen gauge length is as highly inhomogeneous as in the other materials exhibiting DSA effects such as aluminium and titanium alloy. During inelastic deformation, propagating high strain rate bands can be closely correlated to the stress serrations. Originality/value For the DSA effect in solid solution treated IN718, the existing researching mainly focuses on the mechanical properties experiment and microstructure observation. In this study, a constitutive formulation, combined with the DSA model, has been proposed, and the mechanical behaviors, including the DSA effect, have been well predicted by a finite element model.

The Effects of Strain Rate and Carbon Concentration on the Dynamic Strain Aging of Cold Rolled Ni-Based Alloy in High Temperature Water

Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behavior of nickel-based superalloy GH4145/SQ

The Effect of Strain Rate on the Tensile Deformation Behavior of Single Crystal, Ni-Based Superalloys

Effects of Increasing the Strain Rate on Mechanical Twinning and Dynamic Strain Aging in Fe-12.5Mn-1.1C and Fe–24Mn-0.45C–2Al Austenitic Steels

Experimental and Numerical Investigations of Dynamic Strain Ageing Behaviour in Solid Solution Treated Inconel 718 Superalloy

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Effect of Strain Rate on the Plastic Deformation and Fracture of 90W-7Ni-3fe Alloy Prepared by Liquid-Phase Sintering

Dynamic strain ageing in an AlMg alloy at different strain rates and temperatures: Experiments and constitutive modelling

The Influence of Strain Aging at Different Temperatures on the Mechanical Properties of Cold-Drawn 10B21 Steel Combined with an Electron Microscope Study of the Structures

Effect of strain rate on microstructure and mechanical properties of spray-formed Al–Cu–Mg alloy

Influence of Strain Rate on Mechanical Behavior of TiNi Shape Memory Alloy under Compression

Effect of Solution Treatment on the Inverse Dynamic Strain Aging of A Ni-Co Base Superalloy

Influence of dynamic strain aging on low-cycle fatigue behavior in nano-sized κ-carbide strengthened FeMnAlC lightweight steel

Effect of Strain Rate and Temperature on the Deformation Behavior in a Ti-23.1Nb-2.0Zr-1.0O Titanium Alloy

Effect of Strain Rate on Microstructure Evolution of a Nickel-Based Superalloy During Hot Deformation

Strain Rate Effects on the Mechanical Properties of an AlCoCrFeNi High-Entropy Alloy

Strain-Rate Sensitivity of Tensile Behaviors for Nickel-Based Superalloys Gh3044 and Gh4033 at Room Temperature

The effect of temperature on the serrated flow in AA5456 alloys

Influence of Pre-Straining and Heating on Strain-Rate Sensitivity of AA5182-O

Effect of strain rate on low cycle fatigue of 316LN stainless steel with varying nitrogen content: Part-I cyclic deformation behavior

Effects of Dynamic Strain Aging on Strain Hardening Behavior, Dislocation Substructure, and Fracture Morphology in a Ferritic Stainless Steel