Abstract:This research characterizes the dynamic hardening behavior of an aluminum alloy sheet of 5182-O for the coupling effect of strain rate and temperature. Tests are carried out for dogbone specimens at different loading conditions to experimentally characterize the strain rate hardening and thermal softening effect for the alloy. The behaviours are then modeled by the Johnson-Cook, Zerilli-Armstrong and Lim-Huh models. In addition, the FEA-friendly polynomial model and artificial neural network (ANN) model are used to describe the highly non-linearity and coupling of strain hardening. Factors affecting ANN predicting accuracy and numerical computing efficiency are comprehensively studied including network structure, parameter settings and optimization algorithms. All the analytical and ANN models are also implemented into ABAQUS/Explicit to numerically compute the reaction force of tensile tests of dogbone specimens. The strain hardening curves are predicted by the analytical and ANN models for the comparison with experimental measurements to evaluate their performance. The experimental results show that the strain rate is slightly negative at room temperature, while the strain rate effect turns to be positive as temperature rises. The comparison of the flow curves between prediction and experiments reveals that the coupling effect is reasonably illustrated by the proposed polynomial model and the ANN model illustrates the flow curves with the dramatically much better accuracy than all the other models. The numerically predicted reaction forces prove that the ANN model accurately illustrates the load capability with the best agreement among the models studied in this research. The numerical computation also shows that the numerical computation efficiency of the ANN model is slightly reduced compared with analytical models, but the reduction is not much and worthwhile compared with the high accuracy of ANN.

Influence of Pre-Straining and Heating on Strain-Rate Sensitivity of AA5182-O

Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy

Combined Effect of Pre-Strain at Elevated Temperature and Pre-Aging on Aging Strength and Microstructures of AA6082

Influence of Pre-strain on the Mechanical Properties of A6111-T4P Sheet with Bake Hardening

The Influence of Cold Forming and Heat Treatment Processes on the Mechanical and Fracture Properties of AA6016 Aluminum Sheets

Strain Hardening under Large Deformation for AA5182

The Effects of Strain Rate and Anisotropy on the Formability and Mechanical Behaviour of Aluminium Alloy 2024-T3

Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy

Enhanced Constitutive Model for Aeronautic Aluminium Alloy (AA2024-T351) under High Strain Rates and Elevated Temperatures

Strain hardening and orientation hardening/softening in cold rolled AA 5052 aluminum alloy

Effect of Heat Treatment on the Microstructure and Properties of High Strain Rate Rolled 7050 Aluminum Alloy

Strain Rate Effects on the Mechanical Properties of an AlCoCrFeNi High-Entropy Alloy

An Experimental Study on Strain Rate-Dependent Tensile Properties of Alumiunium L2

Effects of pre-stretching and baking treatment on microstructural evolution and mechanical properties of 7A09 aluminum alloy subjected to pre-hardening forming

Study on Mechanical Properties and Constitutive Model of 5052 Aluminium Alloy

Effect of Pre-Stretch on the Precipitation Behavior and the Mechanical Properties of 2219 Al Alloy

Strain Rate Effect on the Fracture Behavior of the AA5754 Aluminum Alloy

High Strain Rate Deformation of Heat-Treated AA2519 Alloy

Effect of aging treatment on the microstructure and flow behavior of 6063 aluminum alloy compressed over a wide range of strain rate

The Effects of Strain Rate and Carbon Concentration on the Dynamic Strain Aging of Cold Rolled Ni-Based Alloy in High Temperature Water

Large strain flow curve characterization considering strain rate and thermal effect for 5182-O aluminum alloy