Abstract:Due to its advantages of high sensitivity and wide frequency response, the optical fiber interferometric method is admirably suited for the applications of dynamic measurement. In this paper, an optical fiber Michelson interferometer is used to realize non-contact micro vibration measurement. An optical fiber collimator emits a laser beam to the measured surface and receives the reflected laser beam. The optical path change of the reflected light from the measured surface is converted to phase change through the non-balanced interferometer. Due to the external environmental effect, the initial phase random drift of fiber interferometer occurs. So the amplitude fluctuations of the interference signal seriously affect the output signal to noise ratio of the fiber interferometer. Therefore, in order to get the true phase information from interference signal, an effective method of signal demodulation is necessary to eliminate the influence of the initial phase drift in the phase measurement. In this paper, the phase signal demodulation is realized with PGC(Phase Generated Carrier) method based on ARCTAN calculation. A large amplitude phase modulation signal beyond the frequency range of the detected signal is introduced in the PGC demodulation method. The desired phase result could be obtained through ARCTAN calculation with the quotient of two orthogonal signals. The PGC method based on ARCTAN calculation eliminates the influence of the signal amplitude drift. This scheme owns a better response characteristic for the abrupt signals. In this paper, a non-contact micro vibration measurement experimental system based on the non-balanced interferometer is implemented in the laboratory. The frequency response range of 1~1KHz and the displacement resolution of 1nm in vibration situation are realized.

Optical heterodyne micro-vibration measurement based on all-fiber acousto-optic frequency shifter

Optical heterodyne micro-vibration measurement based on all-fiber acousto-optic frequency shifter

Optical Heterodyne Microvibration Detection Based on All-Fiber Acousto-Optic Superlattice Modulation

Micro-vibration measuring technology based on heterodyne interference

All-fiber Frequency Shifter Consisting of a Fiber Bragg Grating Modulated Via an Acoustic Flexural Wave for Optical Heterodyne Measurement.

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

An Optical Orthogonal Heterodyne Demodulation Technology for Interferometric Fiber-optic Sensor

An All-Fiber Tunable Ultralow Frequency Shifter Based on Cascaded Acousto-Optic Tunable Filters

All-fiber low-frequency shifter based on acousto-optic interaction and its heterodyne vibration response

All-fiber Vibration Sensor Based on a Fabry–Perot Interferometer and a Microstructure Beam

Non-contact Micro Vibration Measurement System Based on Non-equilibrium Optical Fiber Michelson Interferometer

Non-contact Micro Vibration Measurement System Based on Optical Fiber Michelson Interferometer

Low-Frequency Vibration Sensor with Dual-Fiber Fabry–Perot Interferometer Using a Low-Coherence LED

All Fiber Distributed Vibration Sensing Using Modulated Time-Difference Pulses

Vibration-Displacement Measurement Employing Phase Tracking Technique with an Optical Fiber Michelson Interferometer

Micro-vibration Detection with Heterodyne Holography Based on Time-Averaged Method

All-Fiber Frequency Shifter Based on an Acousto-Optic Tunable Filter Cascaded with a Tapered Fiber-Coupled Microcavity

Fiber-optic Micro Vibration Sensors Fabricated by a Femtosecond Laser

All-fiber heterodyne velocity and displacement interferometer based on DPLL Doppler tracking with sub-nanometer per second and picometer sensitivity

Homodyne Laser Vibrometer With Detectability of Nanoscale Vibration and Adaptability to Reflectivity