Abstract:Using an selective catalytic reduction (SCR) catalyst to oxidize and remove elemental mercury (Hg-0) synergistically is a promising method for mercury emission control in coal combustion power plants and is currently attracting widespread interest. In this study, a developed mercury thermal desorption (Hg-TPD) approach, combined with other associated methods, was employed for the identification of mercury species in the Mn-based SCR catalysts that have been used for synergistic Hg-0 removal. The analysis results demonstrated that the Hg-0 adsorption on the catalysts was a necessary process for the Hg-0 removal, though the SCR catalysts removed Hg-0 mainly through catalytic oxidation and the amount of the adsorbed mercury contributed only a little to the He removal efficiency. This essential adsorption process was mainly realized through chemisorption. (HgO)-O-0 was the prime species that was identified to form in the catalysts, and a little amount of adsorbed HgCl2, Hg(NO3)(2), and Hg-OM was detected as well in the samples spent in the simulated coal-fired flue gases. O-2, HC1, NO, and high concentration of CO2 in the flue gas all promoted the adsorption capacity and the generation of the related Hg compounds, so that they were conductive to Hg-0 removal efficiency, whereas a similar phenomenon was not observed in the presence of SO2, NH3, and H2O, and meanwhile the amount of adsorbed HgO was decreased, so that the efficiency was inhibited. The mobility testing by a sequential extraction procedure indicated that most of the retained Hg belonged to the mobile fraction, which was in accordance with the identification results of the Hg-TPD analysis. The consequences of this research would create a better understanding of the Hg-0 removal mechanism over the Mn-based SCR catalysts and provide additional information on the disposal of the retired catalysts in the environment.

Analysis of Mercury Species over CuO–MnO2–Fe2O3/γ-Al2O3 Catalysts by Thermal Desorption

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Speciation of mercury formed on MnOx-CeO2/γ-Al2O3 catalyst surface

Catalytic Oxidation of Hg0 by CuO–MnO2–Fe2O3/γ-Al2O3 Catalyst

Research on the Mechanism of Elemental Mercury Removal over Mn-Based SCR Catalysts by a Developed Hg-TPD Method

Adsorption and catalytic oxidation of gaseous elemental mercury in flue gas over MnOx/Alumina

Role of flue gas components in mercury oxidation over TiO2 supported MnOx-CeO2 mixed-oxide at low temperature.

Study on catalysts for catalytic oxidation of gaseous elemental mercury

Removal of elemental mercury from flue gas by supported MnOx/ Al2O3 catalyst at low temperature

Catalytic removal of Hg0 in flue gas by heterogeneous Fenton-like catalysts

Gaseous Elemental Mercury Removal Through Heterogeneous Fenton-like Processes Using Novel Magnetically Separable Cu0.3Fe2.7−Ti O4 Catalysts

Catalytic Oxidation of Elemental Mercury in Coal-Combustion Flue Gas over the CuAlO2 Catalyst

Mercury/oxygen reaction mechanism over CuFe2O4 catalyst

Cobalt Manganese Oxides Modified Titania Catalysts for Oxidation of Elemental Mercury at Low Flue Gas Temperature

Significance of Fe2O3 Modified SCR Catalyst for Gas-Phase Elemental Mercury Oxidation in Coal-Fired Flue Gas

Structure-activity relationships, product species distribution and the mechanism of effect of multi-component flue gas on Hg0 adsorption and oxidation over CuO/ACs

Elemental Mercury (hg0) Removal from Containing SO2/NO Flue Gas by Magnetically Separable Fe2.45Ti0.55O4/H2O2 Advanced Oxidation Processes

Catalytic oxidation of elemental mercury in flue gas on MnO_x/α-Al_2O_3

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Synergistic effect of HCl, SO2 and O2 on mercury removal by Mn0.5Cu0.5Fe2O4 adsorbent