Abstract:Using an selective catalytic reduction (SCR) catalyst to oxidize and remove elemental mercury (Hg-0) synergistically is a promising method for mercury emission control in coal combustion power plants and is currently attracting widespread interest. In this study, a developed mercury thermal desorption (Hg-TPD) approach, combined with other associated methods, was employed for the identification of mercury species in the Mn-based SCR catalysts that have been used for synergistic Hg-0 removal. The analysis results demonstrated that the Hg-0 adsorption on the catalysts was a necessary process for the Hg-0 removal, though the SCR catalysts removed Hg-0 mainly through catalytic oxidation and the amount of the adsorbed mercury contributed only a little to the He removal efficiency. This essential adsorption process was mainly realized through chemisorption. (HgO)-O-0 was the prime species that was identified to form in the catalysts, and a little amount of adsorbed HgCl2, Hg(NO3)(2), and Hg-OM was detected as well in the samples spent in the simulated coal-fired flue gases. O-2, HC1, NO, and high concentration of CO2 in the flue gas all promoted the adsorption capacity and the generation of the related Hg compounds, so that they were conductive to Hg-0 removal efficiency, whereas a similar phenomenon was not observed in the presence of SO2, NH3, and H2O, and meanwhile the amount of adsorbed HgO was decreased, so that the efficiency was inhibited. The mobility testing by a sequential extraction procedure indicated that most of the retained Hg belonged to the mobile fraction, which was in accordance with the identification results of the Hg-TPD analysis. The consequences of this research would create a better understanding of the Hg-0 removal mechanism over the Mn-based SCR catalysts and provide additional information on the disposal of the retired catalysts in the environment.

Speciation of mercury formed on MnOx-CeO2/γ-Al2O3 catalyst surface

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Mechanistic Investigation on the Hg0 Elimination Ability of MnOx–CeOx Nanorod Adsorbents: Effects of Mn/Ce Molar Ratio

Analysis of Mercury Species over CuO–MnO2–Fe2O3/γ-Al2O3 Catalysts by Thermal Desorption

Research on the Mechanism of Elemental Mercury Removal over Mn-Based SCR Catalysts by a Developed Hg-TPD Method

Catalytic Oxidation of Hg0 by MnOx–CeO2/γ-Al2O3 Catalyst at Low Temperatures

Synergistic catalytic oxidation of Hg0 and NH3-SCR of NO over MnCeTiOx catalyst in flue gas

Superior activity of MnO x-CeO 2/TiO 2 catalyst for catalytic oxidation of elemental mercury at low flue gas temperatures

SCR Atmosphere Induced Reduction of Oxidized Mercury over CuO/CeO2-TiO2 Catalyst.

Catalytic Oxidation of Hg0 by CuO–MnO2–Fe2O3/γ-Al2O3 Catalyst

Catalytic Oxidation of Elemental Mercury in Coal-Combustion Flue Gas over the CuAlO2 Catalyst

Adsorption and catalytic oxidation of gaseous elemental mercury in flue gas over MnOx/Alumina

Mercury Oxidation Over A Vanadia-Based Selective Catalytic Reduction Catalyst

Mn doped CeO2-MoO3/γ-Al2O3 catalysts for the enhanced adsorption and catalytic oxidation of Hg0 in oxygen atmosphere

Role of flue gas components in mercury oxidation over TiO2 supported MnOx-CeO2 mixed-oxide at low temperature.

Catalytic oxidation of elemental mercury in flue gas on MnO_x/α-Al_2O_3

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Experimental and Mechanism Study on Mercury Catalytic Oxidation Over Cerium Based Catalysts

A Kinetic Study on Mercury Oxidation by Hcl over Typical Mn-Based Scr Catalysts

CuO-CeO2/TiO2 Catalyst for Hg0 Catalytic Oxidation under SCR Atmosphere

Study on catalysts for catalytic oxidation of gaseous elemental mercury