Abstract:Rattle-type Fe3O4@CuS synthesized using a two-step method was applied for elemental mercury (Hg-0) adsorption in coal combustion flue gas for the first time. The Fe3O4 with strong magnetization was an ideal candidate as a core to make the sorbent recyclable, while the stabilized ultrathin CuS shell assured that the Fe3O4@CuS had a higher Brunauer-Emmett-Teller (BET) surface area with more exposed active sites and stronger magnetization. The optimal operating temperature of 75 degrees C allowed for the injection of the sorbent between the wet desulfurization (WFGD) and wet electrostatic precipitator (WESP), which removed the detrimental influence of nitrogen oxides. Simulated flue gas (SFG) in this section showed a slight inhibitive effect on Hg-0 adsorption over the Fe3O4@CuS, mainly due to the presence of water vapor (H2O). The inhibition of H2O was proven to be the result of an active site prevention effect instead of the widely recognized competitive adsorption effect. The adsorption capacity and rate of the Fe3O4@CuS for Hg-0 capture reached 80.73 mg g(-1) and 13.22 mu g (g min)(-1), which were the highest values among the magnetic sorbents currently reported for Hg-0 removal from coal combustion flue gas. These properties allowed the sorbent to maintain a 100% Hg-0 capture efficiency for more than 20 h with only a SO mg dosage when no regeneration step was applied. Meanwhile, the contacting time between the sorbent and Hg-0 was generally less than 5 s in a typical sorbent injection process. Polysulfides dominated the capturing process and primarily contributed to the extremely high adsorption capacity/rate. A multistep reaction mechanism was proposed to explain the Hg-0 adsorption over Fe3O4@CuS. At the first stage, polysulfide participated in Hg-0 adsorption as the most active component and was consumed rapidly. After that, S-S dimers, sulfides, and even copper-terminated sites functioned as the adsorption centers. The as-formed mercury-copper (Hg-Cu) amalgam was transformed into mercury sulfide (HgS), a process that was dependent on the extent of the saturation of sulfide sites. With these advantages, Fe3O4@CuS is a promising, cost-effective, highly recyclable, and efficient alternative to the traditional activated carbon for capturing Hg-0 in coal combustion flue gases.

Gaseous Elemental Mercury Removal Through Heterogeneous Fenton-like Processes Using Novel Magnetically Separable Cu0.3Fe2.7−Ti O4 Catalysts

Review of Elemental Mercury (hg0) Removal by CuO-based Materials

Fe3-xCuxO4 as highly active heterogeneous Fenton-like catalysts toward elemental mercury removal

Catalytic removal of Hg0 in flue gas by heterogeneous Fenton-like catalysts

Elemental Mercury (hg0) Removal from Containing SO2/NO Flue Gas by Magnetically Separable Fe2.45Ti0.55O4/H2O2 Advanced Oxidation Processes

Elemental Mercury Removal from Flue Gas over Silver-Loaded CuS-Wrapped Fe3O4 Sorbent

Gaseous Elemental Mercury Removal Using Combined Metal Ions and Heat Activated Peroxymonosulfate/H2O2 Solutions

Elemental Mercury Removal from Flue Gas over Silver-Loaded CuS-Wrapped Fe 3 O 4 Sorbent

A Study on Removal of Elemental Mercury in Flue Gas Using Fenton Solution

The Experimental and Mechanism Study of Novel Heterogeneous Fenton-like Reactions Using Fe3−Ti O4 Catalysts for Hg0 Absorption

Electro-chemical oxidation of gaseous elemental mercury via a gas diffusion reactor with Fenton-like catalyst

Analysis of Mercury Species over CuO–MnO2–Fe2O3/γ-Al2O3 Catalysts by Thermal Desorption

Hg0 chemisorption of magnetic manganese cobalt nano ferrite from simulated flue gas

Heterogeneous Reaction Mechanisms and Functional Materials for Elemental Mercury Removal from Industrial Flue Gas

Efficient removal of Hg0 from simulated flue gas by novel magnetic Ag2WO4/BiOI/CoFe2O4 photocatalysts

Novel Effective Catalyst for Elemental Mercury Removal from Coal-Fired Flue Gas and the Mechanism Investigation.

Removal of Elemental Mercury in Flue Gas by Cu-Fe Modified Magnetosphere from Coal Combustion Fly Ash

Effective Capture and Immobilization of Hg 0 from Flue Gas Using a Novel Selenium-Functionalized SrFeO 3-δ /HNTs Half-Metal Composite: Adsorption, Photocatalytic Oxidation, and Mechanism

Magnetic Rattle-Type Fe3O4@CuS Nanoparticles As Recyclable Sorbents for Mercury Capture from Coal Combustion Flue Gas

Removing and recovering gas-phase elemental mercury by Cu(x)Co(3-x)O(4) (0.75< or = x < or =2.25) in the presence of sulphur compounds.

Elemental mercury removal by adsorbent CuO-modified MnO2 nano-hollow spheres: performance, kinetics, and mechanism