Alkali-Hydrothermal Synthesis of Acicular Tobermorite Using Natural Mineral K-Feldspar Powder

jing yang,xiumin tan,hongwen ma,cheng zeng,hui peng
DOI: https://doi.org/10.1080/00150193.2015.1049497
2015-01-01
Ferroelectrics
Abstract:This research reports a new economical method of preparing acicular tobermorite as well as high-valuable KOH obtained. Acicular tobermorite was hydrothermally synthesized at 180 similar to 250 degrees C for 4 similar to 8 h using the K-feldspar powder and CaO chemical firstly while the filtrate could be used to prepare KOH. The K-feldspar powder used is from Luonan county of Shaanxi province in China. The XRD analysis indicated that the main phase is microcline with the content of 91%. The chemical analysis showed that the main chemical components of the K-feldspar powder are SiO2 64.53%, Al2O3 16.70% and K2O 14.75% in mass. The micrographs of the synthesized samples at the condition of different water/solid ratios, hydrothermal treated temperature and time were investigated. It is concluded that the well-crystallized tobermorite was formed with the acicular shape when the synthesized parameters were as follows. nCa/n(Si+Al) = 0.83, Water/Solid(in mass) = 20, T = 250 degrees C and t = 8h. The synthesized well-crystalline tobermorite sample was characterized by the use of chemical analysis, powder X-ray diffraction and scanning electron microscope. It is shown that the synthesized sample is acicular with the diameter of around 0.2 similar to 0.5 mu m.
What problem does this paper attempt to address?