Abstract:To improve the potassium availability of feldspar at ordinary temperatures, the mechanical grinding and addition of sodium hydroxide/salts were employed to study the effects of mechanical activation and strong alkali addition on particle characteristics, water-soluble potassium, and the available potassium of feldspar. A laser particle size analyzer was utilized for the direct determination of particle size distribution (PSD) using ground samples. The Brunauer-Emmett-Teller (BET) method was employed for specific surface areas. X-ray diffraction (XRD) was employed for structural characterization, scanning electron microscopy (SEM) for morphology exploration, and energy dispersive spectroscopy (EDS) to determine the chemical composition of potassium feldspar powder. The results revealed that the mechanical activation of potassium feldspar could reduce the particle size and produce agglomerated nanoparticles in the later period. The addition of NaOH and sodium salt did not cause agglomeration, and NaOH dissolved the nanoparticles. The water-soluble potassium content of feldspar in each treatment increased during mechanical grinding, from 21.64 mg kg-1 to 1495.81 mg·kg-1, by adding NaOH 5% weight of potassium feldspar powder and to 3044.08 mg·kg-1 by adding NaOH 10% weight with effects different from those of mechanical shaking. By comparison, only 162.93 mg·kg-1 water-soluble potassium was obtained by adding NaOH 5% weight. The dissolved potassium in the former case was significantly higher than in the latter, and the addition of NaOH and sodium salts significantly enhanced the water-soluble potassium contents due to ion exchange. Furthermore, the addition of sodium hydroxide improved the water-soluble potassium due to its mechanochemical action on potassium feldspar. The mechanical energy changed the crystal structure of potassium feldspar, explaining the increase in available potassium. The addition of sodium salts did not promote change in the feldspar's structure, thereby did not raise the available potassium content. The reason for this was related to the mechanochemical action on sodium hydroxide and feldspar, which could promote the dissolution of fine particles, thereby incrementing the available potassium.

The Synthesis of Tobermorite from Potassium Feldspar Powder:An Experimental Study

Hydrothermal Synthesis of K-ZSM-5 Molecular Sieve from Potassium Feldspar

Preparation of potassium sulfate and zeolite NaA from K-feldspar by a novel hydrothermal process

Effects of Different Potassium Salts on the Formation of Mullite As the Only Crystal Phase in Kaolinite

Extraction of potassium from K-feldspar via the CaCl2 calcination route

Thermal Behavior and Determination of the Heated Structure of 11? Anomalous Tobermorite by in Situ X-ray Diffraction

Effects of KOH and Temperature on Hydrothermal Synthesis of Α-Feooh Nanowire

Preparation of Thermal Insulation Ceramics Using Felsic Tailings as Main Raw Material and Soda-ash Dregs as Flux

Mechanism of Potassium Release from Feldspar by Mechanical Activation in Presence of Additives at Ordinary Temperatures

Hydrothermal Synthesis of Zeolite A from K-feldspar and Its Crystallization Mechanism

Evolution of mineral phases and microstructure of high efficiency Si–Ca–K–Mg fertilizer prepared by water-insoluble K-feldspar

Preparation of Cordierite Powder by Chemical Coprecipitation–rotation Evaporation and Solid Reaction Sintering

Modification of liquid phase and microstructure of sintered mullite by different additives

Simple and rapid synthesis of zeolite W from K‐feldspar via the improved hydrothermal method

Hydrothermal decomposition of K-feldspar in KOH–NaOH–H 2 O medium

Study on the Effect of Temperature on the Crystal Transformation of Microporous Calcium Silicate Synthesized of Extraction Silicon Solution from Fly Ash

Hydrothermal extraction of potassium from potassic quartz syenite and preparation of aluminum hydroxide

Crystallization and Quantification of Crystalline and Non-Crystalline Phases in Kaolin-Based Cordierites

Preparation of Porous Silica Powder Via Selective Acid Leaching of Calcined Tobermorite

Activate nutrients access to plants as multiphase slow-release fertilizers by sintering reaction in K2O–MgO–Al2O3–SiO2 system using K-feldspar as a major source

Effect of Sio2/Al2o3 Molar Ratio on Microstructure and Properties of Phosphoric Acid-Based Metakaolin Geopolymerss