Abstract:Helium Cooled Ceramic Breeder (HCCB) blanket, which has been determined as one of the blanket candidates for China Fusion Engineering Test Reactor (CFETR), is the critical component of the fusion reactor. The neutronics and thermal-hydraulic performances of the blanket are the bases of the safe operation, and they are also the initial boundary conditions for the other performance analyses. Both performances are influenced by the neutron wall loading (NWL) distribution on the blanket and the radial structural arrangement of the internal functional zones. In our previous work, the influences of the poloidal nonuniform NWL on the neutronics performances of the blanket have been investigated preliminarily. However, as the nuclear power deposition in each blanket component is the internal heat source for the thermal-hydraulic analyses, it's essential to further investigate the influence of the poloidal nonuniform NWL on the thermal-hydraulic performances of the blanket. In this paper, taking the typical CFETR HCCB blanket module as the research object, firstly, both the neutronics and the thermal-hydraulic models are established. For investigating the influence of the poloidal nonuniform NWL on blanket performances, both models are divided into five identical parts along the poloidal direction. Afterwards, by referencing the actual poloidal NWL distribution in CFETR, we have aggregately proposed three kinds of poloidal nonuniform NWL distribution forms, including two symmetrical and one stepped NWL. On these bases, both the neutronics and the thermal-hydraulic analyses under the poloidal nonuniform NWL distributions are conducted, and the calculation results are compared with those corresponding to the uniform NWL distribution. The comparison results show that the maximum temperature of every functional zone calculated under the three nonuniform NWL distributions is generally higher than that corresponding to the uniform NWL distribution, which means that the thermal-hydraulic results calculated under the simplified uniform NWL distribution are not conservative. Under the condition of nonuniform NWL distributions, there is obvious poloidal temperature nonuniformity in every functional zone. Besides, the temperature deviations between the stepped and the uniform NWL distributions are generally larger than those between the symmetrical and the uniform ones. This paper can provide some valuable references for the detailed engineering design, analyses, and optimizations of the CFETR HCCB blanket.

Analysis of Turbulent Heat Transfer in Rectangular Flow Channels Inside the First Wall of Blanket Modules

Heat transfer coefficient calculation for analysis of ITER shield block using CFX and ANSYS

Numerical Analysis of Heat Transfer in the First Wall of CFETR WCSB Blanket

Preliminary Analysis of Flow and Heat Transfer Characteristics of WCSB Blanket Module First wall

Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component

Thermal and Stress Analysis on the First Wall of Supercritical Pressure Water-cooled Blanket

Numerical Studies on the Heat Transfer and Friction Characteristics of the First Wall Inserted with the Screw Blade for Water Cooled Ceramic Breeder Blanket of Cfetr

Cfd Application To Subcooled Boiling Analyses On The First Wall Of Wccb Blanket For Cfetr

Heat-Transfer in Plasma-Facing Components of Fusion-Reactors - Non-Mhd Laminar-Flow in Rectangular Channels

Numerical Simulation and Analysis of Thermal-Hydraulic Characteristics of the First Wall in Dual-cooled Waste Transmutation Blanket

Evaluation on the Heat Removal Capacity of the First Wall for Water Cooled Breeder Blanket of CFETR

CFD Analysis of Flow Distributions and Pressure Drops in the Whole CFETR WCCB Blanket Module with Different Turbulence Models

Numerical simulation of a blanket cooling system for fusion reactor based on PWR conditions

Numerical investigation of heat transfer enhancement in ribbed channel for the first wall of DFLL-TBM in ITER

Flow Distribution Analysis of Water-Cooled Solid Breeder Test Blanket Module

Numerical Analysis Of Forced Convection Heat Transfer In First Wall Rib-Roughened Channels For Liquid Lithium Lead Blanket

Flow distribution analysis of partial model for WCSB blanket module

Numerical Study on Flow and Heat Transfer Characteristics in the Rod Bundle Channels under Super Critical Pressure Condition

Cfd Analysis of Heat Transfer in Subchannels of A Super Fast Reactor

Preliminary Thermal-Hydraulic Influence of the Poloidal Nonuniform Neutron Wall Loading on the CFETR HCCB Blanket

Comparative study of flow and heat transfer characteristics of HCF rod bundles in rectangular and triangular arrangement