Abstract:Helium Cooled Ceramic Breeder (HCCB) blanket, which has been determined as one of the blanket candidates for China Fusion Engineering Test Reactor (CFETR), is the critical component of the fusion reactor. The neutronics and thermal-hydraulic performances of the blanket are the bases of the safe operation, and they are also the initial boundary conditions for the other performance analyses. Both performances are influenced by the neutron wall loading (NWL) distribution on the blanket and the radial structural arrangement of the internal functional zones. In our previous work, the influences of the poloidal nonuniform NWL on the neutronics performances of the blanket have been investigated preliminarily. However, as the nuclear power deposition in each blanket component is the internal heat source for the thermal-hydraulic analyses, it's essential to further investigate the influence of the poloidal nonuniform NWL on the thermal-hydraulic performances of the blanket. In this paper, taking the typical CFETR HCCB blanket module as the research object, firstly, both the neutronics and the thermal-hydraulic models are established. For investigating the influence of the poloidal nonuniform NWL on blanket performances, both models are divided into five identical parts along the poloidal direction. Afterwards, by referencing the actual poloidal NWL distribution in CFETR, we have aggregately proposed three kinds of poloidal nonuniform NWL distribution forms, including two symmetrical and one stepped NWL. On these bases, both the neutronics and the thermal-hydraulic analyses under the poloidal nonuniform NWL distributions are conducted, and the calculation results are compared with those corresponding to the uniform NWL distribution. The comparison results show that the maximum temperature of every functional zone calculated under the three nonuniform NWL distributions is generally higher than that corresponding to the uniform NWL distribution, which means that the thermal-hydraulic results calculated under the simplified uniform NWL distribution are not conservative. Under the condition of nonuniform NWL distributions, there is obvious poloidal temperature nonuniformity in every functional zone. Besides, the temperature deviations between the stepped and the uniform NWL distributions are generally larger than those between the symmetrical and the uniform ones. This paper can provide some valuable references for the detailed engineering design, analyses, and optimizations of the CFETR HCCB blanket.

Preliminary Analysis of Flow and Heat Transfer Characteristics of WCSB Blanket Module First wall

Numerical Analysis of Heat Transfer in the First Wall of CFETR WCSB Blanket

Flow Distribution Analysis of Water-Cooled Solid Breeder Test Blanket Module

Numerical Simulation and Analysis of Thermal-Hydraulic Characteristics of the First Wall in Dual-cooled Waste Transmutation Blanket

Design, Analysis and Optimization of the First Wall Cooling System of the CFETR Blanket

Optimization of a WCCB Blanket Module with Detached First Wall for CFETR

Thermal and Stress Analysis on the First Wall of Supercritical Pressure Water-cooled Blanket

Evaluation on the Heat Removal Capacity of the First Wall for Water Cooled Breeder Blanket of CFETR

Study on Flow Distribution of Coolant Pipes for WCSB Module

Flow distribution analysis of partial model for WCSB blanket module

CFD Analysis of Flow Distributions and Pressure Drops in the Whole CFETR WCCB Blanket Module with Different Turbulence Models

Thermo-mechanical Analysis on the Full Module of Water Cooled Ceramic Breeder Blanket for CFETR

Thermal–Hydraulic Analysis for One Water-Cooled Blanket Module of CFETR Based on RELAP5

Thermal-hydraulic Analysis on the Whole Module of Water Cooled Ceramic Breeder Blanket for CFETR

Preliminary Analysis on DNB in the First Wall of WCCB Blanket for CFETR

Preliminary Design of the CFETR HCCB Blanket with S-Shaped Cooling Plate in BU and Thermal–Mechanical Analysis of the First Wall

Design and analysis of the equatorial inboard WCCB blanket module for CFETR

Cfd Application To Subcooled Boiling Analyses On The First Wall Of Wccb Blanket For Cfetr

Numerical Studies on the Heat Transfer and Friction Characteristics of the First Wall Inserted with the Screw Blade for Water Cooled Ceramic Breeder Blanket of Cfetr

Preliminary Thermal-Hydraulic Influence of the Poloidal Nonuniform Neutron Wall Loading on the CFETR HCCB Blanket

Thermo-mechanical Assessment of the Optimized CFETR Water Cooled Ceramic Breeder Blanket