Abstract:As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm3. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.

Research on Calculation Method of MEMS-based Safety and Arming System

Study on the Elastic Coefficient of MEMS Planar Microspring

A MEMS Safe and Arm Device for Spin Stabilized Ammunition Fuze

Research on Multiphysics-Driven MEMS Safety and Arming Devices

The Research on Actuation Performance of MEMS Safety-and-Arming Device with Interlock Mechanism.

Safety and Arming Device with MEMS Based Encryption System Driven by Electrothermal Actuator

The Research on MEMS S&A Device with Metal-Silicon Composite Structure

Test and Improvement of a Fuze MEMS Setback Arming Device Based on the EDM Process

Research on an On-Chip MEMS Based Safety and Arming Device with a Mechanical Encryption System.

Macro modeling method for electrostatic-drive silicon diaphragm

Simulation and Test of a MEMS Arming Device for a Fuze

Design of a Double-Layer Electrothermal MEMS Safety and Arming Device with a Bistable Mechanism

A Review on MEMS Safety and Arming Devices for Micro?initiation System

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

Research on a MEMS Based Encrypted Rotary Safety and Arming Device

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

Research on the Application of Microcast Electromagnetic Coil in an Si MEMS Bistable Recoverable Safety and Arming Device

Full Silicon-Based Detonation System Embedded With Micro Safety And Arming Devices

Design of an Intelligent MEMS Safety and Arming Device with a Condition Feedback Function

Integration Design of MEMS Electro-Thermal Safety-and-arming Devices

Research on a MEMS Detonated Device with Built-in Safety and Arming Device