Abstract:Single silicon nanobeam photonic crystal cavity based sensors are systematically analyzed and designed. By using perturbation theory and numerical simulations, both dielectric-mode and air-mode cavities are extensively investigated in terms of sensitivity (S), figure of merit (FOM), detection limit (DL), footprint size, and coupling scheme. The analytical study reveals a sensitivity limit of 1176 nm/RIU and a maximum figure of merit of 5070 for nanobeam cavity based sensors, due to the absorption of light near 1550 nm wavelength. when water is used as the carrier fluid. Design of high FOM (> 4800) nanobeam cavities is demonstrated with S of 291 and 232 nm/RIU for air modes and dielectric modes, respectively. The calculation results indicate that on a 220-nm-thick-silicon SOI platform, it is possible to design a nanobeam cavity based biosensor with DL on the order of 4 × 10-6 RIU, insertion loss of -30 dB, and cavity length less than 40a (a is the lattice constant). To approach the absorption bounded DL, the presented design is adequate when analyte absorption dominates the loss, regardless if it is for dielectric modes or air modes. These results would be conducive to clarification of the confusion on the priority of air mode and dielectric mode in designing nanobeam cavities based sensors, as well as recent considerable efforts to maximize Sand FOM.

High Confinement Factor Ridge Slot Waveguide for Optical Sensing

Si3N4 – SiO2 Based Curve Slot Waveguide for High Confinement Factor and Low Mode Effective Area along with Biosensing Application

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Highly-sensitive Optical Waveguide Sensor Based on SiON Using Two Cascaded-Microring Resonators

An Integrated Optical Sensor Based on Cascaded Polarization Convertor and Slot Waveguide Microring Resonator

Loop-Mirror-Based Slot Waveguide Refractive Index Sensor

Highly-Sensitive Optical Biosensors Based on Silicon-On-Insulator Nanowire Waveguide

Suspended Slotted Photonic Crystal Cavities for High-Sensitivity Refractive Index Sensing

Optical Waveguide Double-Ring Sensor Using Intensity Interrogation with a Low-Cost Broadband Source

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Subwavelength Grating Double Slot Waveguide Racetrack Ring Resonator for Refractive Index Sensing Application

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

High Sensitivity Refractive Index Sensor Based on Trapezoidal Subwavelength Grating Slot Microring Resonator

Ingaasp Photonic Crystal Slot Nanobeam Waveguides for Refractive Index Sensing

Novel Suspended Small SiO2 Ridge Optical Waveguides for Optical Sensing

Slot-waveguide Fibers for Ultra-Low Volume Optofluidic Sensing

Design and Fabrication of a SOI Optical Waveguide Sensing Platform for Biochemical Sensor Application

On-Chip Chemical Sensing Using Double-slot Silicon Waveguide

Localized Refractive index sensing by integrated photonic crystal waveguide with edge-cavity

Plasmonic Ridge Waveguides with Deep-Subwavelength Outside-Field Confinements.