Abstract:Microstructured optical fibers (MOFs) have been widely utilized for optofluidic waveguides, in which the micro-holes along the MOFs act as microfluidic channels for various applications such as supercontiuum sources and aqueous solution sensors. The air hole diameter of MOFs is generally several microns to tens of microns, which is much smaller compared with traditional fluid-core fiber waveguide. However, for specific applications such as ultra-trace analysis and low-threshold fluidic lasers, this channel dimension is still relatively large. The slot waveguide could confine light in a subwavelength-scale channel, however, the short propagation length and high loss of the waveguide may limit its applications. Here we propose an approach to achieve low-loss subwavelength-scale optofluidic waveguide in MOFs. As shown in Fig. 1(a), the hollow-core of the MOF is tapered down to a subwavelength-scale, and then the MOF is selectively infiltrated with aqueous solution. So light could be confined in an aqueous core surrounded by a tapered air-silica cladding. As the refractive index of the cladding is close to that of air, the index contrast between the fluidic core and the cladding is high enough to provide an efficient index-guiding in a subwavelength-scale core. The mode pattern of a fundamental mode in a tapered aqueous core MOF is calculated when the core diameter is 600nm (Fig. 1(b)). As shown in Fig. 1(c), we compare our tapered air-silica cladding with Teflon cladding. At the wavelength of 633 nm, the light with the fraction of power over 65% could be guided in the aqueous core with the size of 600 nm, which is 4 times higher than that in a core surrounded by a Teflon cladding, which has an overlap fraction of only 15.7%. So the method we propose has obvious advantages over the traditional method using Teflon material. It provides a novel platform for low-loss subwavelength-scale fluid-core guiding with the long interaction length, and therefore have various potential applications.

Slot-waveguide Fibers for Ultra-Low Volume Optofluidic Sensing

Low Loss and Omnidirectional Si3N4 Waveguide for Label-Free Spatial Frequency Shift Super-Resolution Imaging

Modeling of Subwavelength-Diameter Optical Wire Waveguides for Optical Sensing Applications

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

On-Chip Integration of Optical Nanofibers and Nanowires

Optofluidic Micro-Nanofiber Sensors

Microfiber Optical Sensors: A Review

High-efficient Subwavelength-Scale Optofluidic Waveguides with Tapered Microstructured Optical Fibers

Hybrid Fibers with Subwavelength-Scale Liquid Core for Highly Sensitive Sensing and Enhanced Nonlinearity

Side-Hole Microstructured Optical Fiber Integrative Twin-Microchannels for Optofluidic Sensing

Investigation of a novel SMS fiber based planar multimode waveguide and its sensing performance.

High Index Contrast Subwavelength-Scale Optofluidic Waveguide in Mofs

Highly Birefringent Optical-Fiberized Slot Waveguide for Miniature Polarimetric Interference Sensors: A Proposal

Ultra-small Highly Birefringent Slot-Microfiber

Versatile Optofluidic Solid-Core/Liquid-Cladding Waveguide Based on Evanescent Wave Excitation

Ultra-flattened and low dispersion in engineered microfibers with highly efficient nonlinearity reduction.

Tubular Optical Microcavity for Optofluidic Application

Low loss hollow-core waveguide on a silicon substrate

Highly Birefringent Slot-Microfiber

Loop-Mirror-Based Slot Waveguide Refractive Index Sensor