Abstract:Microstructured optical fibers (MOFs) have been widely utilized for optofluidic waveguides, in which the micro-holes along the MOFs act as microfluidic channels for various applications such as supercontiuum sources and aqueous solution sensors. The air hole diameter of MOFs is generally several microns to tens of microns, which is much smaller compared with traditional fluid-core fiber waveguide. However, for specific applications such as ultra-trace analysis and low-threshold fluidic lasers, this channel dimension is still relatively large. The slot waveguide could confine light in a subwavelength-scale channel, however, the short propagation length and high loss of the waveguide may limit its applications. Here we propose an approach to achieve low-loss subwavelength-scale optofluidic waveguide in MOFs. As shown in Fig. 1(a), the hollow-core of the MOF is tapered down to a subwavelength-scale, and then the MOF is selectively infiltrated with aqueous solution. So light could be confined in an aqueous core surrounded by a tapered air-silica cladding. As the refractive index of the cladding is close to that of air, the index contrast between the fluidic core and the cladding is high enough to provide an efficient index-guiding in a subwavelength-scale core. The mode pattern of a fundamental mode in a tapered aqueous core MOF is calculated when the core diameter is 600nm (Fig. 1(b)). As shown in Fig. 1(c), we compare our tapered air-silica cladding with Teflon cladding. At the wavelength of 633 nm, the light with the fraction of power over 65% could be guided in the aqueous core with the size of 600 nm, which is 4 times higher than that in a core surrounded by a Teflon cladding, which has an overlap fraction of only 15.7%. So the method we propose has obvious advantages over the traditional method using Teflon material. It provides a novel platform for low-loss subwavelength-scale fluid-core guiding with the long interaction length, and therefore have various potential applications.

High-efficient Subwavelength-Scale Optofluidic Waveguides with Tapered Microstructured Optical Fibers

Recent Progress in Optical Micro/Nanofiber Technology

Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

High Index Contrast Subwavelength-Scale Optofluidic Waveguide in Mofs

Optofluidics in Microstructured Optical Fibers

Side-Hole Microstructured Optical Fiber Integrative Twin-Microchannels for Optofluidic Sensing

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

High-power Continuous-Wave Optical Waveguiding in a Silica Micro/nanofibre.

Hybrid Fibers with Subwavelength-Scale Liquid Core for Highly Sensitive Sensing and Enhanced Nonlinearity

Hollow Core Micro-Fiber for Optical Wave Guiding and Microfluidic Manipulation

Slot-waveguide Fibers for Ultra-Low Volume Optofluidic Sensing

10-W-level CW waveguiding in an optical micro/nanofiber

A Tunable Optofluidic Circular Liquid Fiber

Wavelength Modulated Anti-Resonant Fiber-Optic Microfluidic Device Based on SMF-HCTF-SMF Structure

Microstructured Optical Fiber for Multichannel Sensing Based on Fano Resonance of the Whispering Gallery Modes

A Compact Optofluidic Cytometer with Integrated Liquid-Core/pdms-cladding Waveguides.

Optofluidics in Photonic Crystal Fibers

Realization of All-in-Fiber Liquid-Core Microstructured Optical Fiber

Tunable Optofluidic Microring Laser Based on a Tapered Hollow Core Microstructured Optical Fiber.

Switchable 3D Optofluidic Y-branch Waveguides Tuned by Dean Flows

Twin-resonance-coupling and High Sensitivity Sensing Characteristics of a Selectively Fluid-Filled Microstructured Optical Fiber.