Abstract:Microstructured optical fibers (MOFs) have been widely utilized for optofluidic waveguides, in which the micro-holes along the MOFs act as microfluidic channels for various applications such as supercontiuum sources and aqueous solution sensors. The air hole diameter of MOFs is generally several microns to tens of microns, which is much smaller compared with traditional fluid-core fiber waveguide. However, for specific applications such as ultra-trace analysis and low-threshold fluidic lasers, this channel dimension is still relatively large. The slot waveguide could confine light in a subwavelength-scale channel, however, the short propagation length and high loss of the waveguide may limit its applications. Here we propose an approach to achieve low-loss subwavelength-scale optofluidic waveguide in MOFs. As shown in Fig. 1(a), the hollow-core of the MOF is tapered down to a subwavelength-scale, and then the MOF is selectively infiltrated with aqueous solution. So light could be confined in an aqueous core surrounded by a tapered air-silica cladding. As the refractive index of the cladding is close to that of air, the index contrast between the fluidic core and the cladding is high enough to provide an efficient index-guiding in a subwavelength-scale core. The mode pattern of a fundamental mode in a tapered aqueous core MOF is calculated when the core diameter is 600nm (Fig. 1(b)). As shown in Fig. 1(c), we compare our tapered air-silica cladding with Teflon cladding. At the wavelength of 633 nm, the light with the fraction of power over 65% could be guided in the aqueous core with the size of 600 nm, which is 4 times higher than that in a core surrounded by a Teflon cladding, which has an overlap fraction of only 15.7%. So the method we propose has obvious advantages over the traditional method using Teflon material. It provides a novel platform for low-loss subwavelength-scale fluid-core guiding with the long interaction length, and therefore have various potential applications.

Hollow Core Micro-Fiber for Optical Wave Guiding and Microfluidic Manipulation

Recent Progress in Optical Micro/Nanofiber Technology

Submicron and Nano-Diameter Silica Wires for Optical Wave Guiding

Optical microfibers and their applications

High-efficient Subwavelength-Scale Optofluidic Waveguides with Tapered Microstructured Optical Fibers

Integrated Hollow-Core Fibers for Nonlinear Optofluidic Applications

High-power Continuous-Wave Optical Waveguiding in a Silica Micro/nanofibre.

Hollow-Core Negative Curvature Fiber: a Novel Platform for Lab-on-a-Fiber

Embedded Multicore Hollow Fiber with High Birefringence.

Hybrid Fibers with Subwavelength-Scale Liquid Core for Highly Sensitive Sensing and Enhanced Nonlinearity

Microfiber and Nanofiber Optics: Principles and Applications

A Compact Optofluidic Cytometer with Integrated Liquid-Core/pdms-cladding Waveguides.

Hollow-core Air-Gap Anti-Resonant Fiber Couplers

10-W-level CW waveguiding in an optical micro/nanofiber

High sensitivity liquid level sensor for microfluidic applications using a hollow core fiber structure

Hollow‐Micropillared Glass Fabricated on Hollow Joe Pye Weed‐Inspired Tubes for Detecting Molecular Signatures

Wavelength Modulated Anti-Resonant Fiber-Optic Microfluidic Device Based on SMF-HCTF-SMF Structure

WGM Micro-Fluidic-Channel Based on Reflection Type Fiber-Tip-Coupled Hollow-Core PCFs

High Index Contrast Subwavelength-Scale Optofluidic Waveguide in Mofs

Lensed Water-Core Teflon-Amorphous Fluoroplastics Optical Fiber

Submicro- and micro-diameter liquid core optical fiber