Abstract:As a non-volatile semiconductor memory technology, phase-change memory has a wide range of application prospects as a result of the excellent comprehensive performance. In this paper, multilayer thin films based on Sb2Te3 material were designed and prepared by inserting the Sn15Sb85 layer. The thermal and electrical properties of superlattice-like Sb2Te3/Sn15Sb85 phase-change films can be adjusted by controlling the thickness ratio of Sb2Te3/Sn15Sb85. In comparison to the monolayer Sb2Te3 film, the multilayer layer Sb2Te3/Sn15Sb85 materials have a higher crystallization temperature, larger crystallization activation energy, and longer data lifetime, indicating the great improvement of thermal stability. The changes in the phase structure and vibrational modes of multilayer Sb2Te3/Sn15Sb85 films were characterized by X-ray diffraction and Raman spectroscopy, respectively. The presence of Sn15Sb85 layers restrains grain growth and refines the grain size. The multilayer Sb2Te3/Sn15Sb85 films exhibit better surface flatness, smaller surface potential undulation, and lower thickness variations than single-layer Sb2Te3. Phase-change memory cells based on the [Sb2Te3 (1 nm)/Sn15Sb85 (9 nm)]5 thin film has a lower threshold voltage (1.9 V) and threshold current (3.1 μA) compared to the Ge2Sb2Te5 film. Meanwhile, the electrical heating model of a phase-change memory cell based on a [Sb2Te3 (1 nm)/Sn15Sb85 (9 nm)]5 multilayer structure was established by multiphysics coupling analysis, proving the great improvement in heat transfer performance and efficiency. The experimental and theoretical studies confirm that the insertion of the Sn15Sb85 layer can significantly improve the crystallization properties of Sb2Te3 films, paving the way for optimizing the phase-change materials by regulating the microstructural parameters.

Direct Observation of Titanium-Centered Octahedra in Titanium–antimony–tellurium Phase-Change Material

Study on the Physical Properties and Structure of Titanium Antimony Thin Films for Phase Change Memory Application

The Optimization Effect of Titanium on the Phase Change Properties of SnSb4 Thin Films for Phase Change Memory Applications

One order of magnitude faster phase change at reduced power in Ti-Sb-Te

Direct observation of metastable face-centered cubic Sb 2 Te 3 crystal

TixSb100−x Thin Films As Candidates for Phase-Change Memory Application

Direct observation of structural transitions in the phase change material Ge2Sb2Te5

Research on Improved Crystallization Properties and Underlying Mechanism of the Sb2Te3 Phase-Change Thin Film by Inserting Sn15Sb85 Layers.

The Effect of Titanium Doping on the Structure and Phase Change Characteristics of Sb4Te

Impact of titanium modification on the performance improvement and phase change mechanism of ZnSb thin film

Microstructure Evolution of the Phase Change Material Tisbte

Microstructure Evolution and Crystallography of the Phase-Change Material TiSbTe Films Annealed in Situ

Sb 7 Te 3 /znsb Multilayer Thin Films for High Thermal Stability and Long Data Retention Phase-Change Memory

Physical Properties and Structure Characteristics of Titanium-Modified Antimony-Selenium Phase Change Thin Film

Ti10Sb60Te30 for Phase Change Memory with High-Temperature Data Retention and Rapid Crystallization Speed

B21-P-09The Crystal Micro-Structure Evolution of In-Situ Annealed Phase Change Material TiSbTe Film

Phase stability and electronic structure of Si2Sb2Te5 phase-change material

Chemical Design Principles for Cache-Type Sc–Sb–Te Phase-Change Memory Materials

Low Thermal Conductivity Phase Change Memory Superlattices

Bonding Nature and Optical Contrast of TiTe_2/Sb_2Te_3 Phase-Change Heterostructure

Understanding The Crystallization Behavior And Structure Of Titanium Addition In Germanium Antimony Phase Change Thin Films