Abstract:This work introduces a stack layer of Lithium Phosphate (Li3PO4) /Titanium Dioxide (TiO2) as a new electron selective passivating contact for c‐Si solar cells. The stack achieves an impressive contact resistivity (ρc) of 0.128 mΩ cm2 on n‐type c‐Si substrates with resistivity ranging from 1 to 3 Ω cm2. Furthermore, it effectively reduces the surface recombination parameter (J0) to less than 4 fA by incorporating a 6 nm a‐Si:H(i) layer. Carrier selective contacts with passivation effects are considered to have a significant influence on the performance of crystalline silicon (c‐Si) solar cells. It is essential for electron selective contact materials to meet the requirements of ultra‐low contact resistance and excellent passivation effects. This work introduces a stack layer of Lithium Phosphate (Li3PO4) /Titanium Dioxide (TiO2) as a new electron selective passivating contact. It is found that the stack achieves an impressive contact resistivity (ρc) of 0.128 mΩ cm2 on n‐type c‐Si substrates with resistivity ranging from 1 to 3 Ω cm (14.6 mΩ cm2 for the n‐Si/a‐Si:H/Li3PO4/TiO2/Al contact). Furthermore, it effectively reduces the surface recombination parameter (J0) to less than 4 fA by incorporating a 6 nm a‐Si:H(i) layer. The characterization of the n‐Si/Li3PO4/TiO2 interface reveals that phosphorus diffusion into silicon plays a crucial role in achieving the ultra‐low contact resistivity, while the presence of PO43− groups helps in fixing hydrogen atoms to maintain the desired chemical passivation effect. Finally, a silicon heterojunction solar cell (SHJ) with a rear full‐area configuration of a‐Si:H/Li3PO4/TiO2/Al is successfully demonstrated achieving an impressive power conversion efficiency of 22.89%. The result proves the efficacy of employing hydrogen‐rich low‐work function metal oxide stacks as electron selective passivating contacts.

Self‐Assembled Monolayer Ti3C2Tx MXene as Electron Selective Heterocontact for Crystalline Silicon Solar Cells

Self‐Assembled Monolayer Ti 3 C 2 T x MXene as Electron Selective Heterocontact for Crystalline Silicon Solar Cells

MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency

Solar Cells: MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency (Adv. Energy Mater. 22/2019)

Temperature and Environmental Stable Titanium Carbide as Electron-Selective Heterocontact for Crystalline Silicon Solar Cells

Solution-processed silicon/SnCl2-treated Ti3C2Tx MXene Schottky junction solar cells

Scaled Deposition of Ti3C2Tx MXene on Complex Surfaces: Application Assessment as Rear Electrodes for Silicon Heterojunction Solar Cells

Ti3C2 MXene nanosheets modified TiO2 ETLs enables efficient solar cells with outstanding device consistency

Ti3C2 MXene Nanosheets–Modified TiO2 Electron‐Transport Layers Enables Efficient Solar Cells with Outstanding Device Consistency

Surface-Modified Metallic Ti3C2Tx MXene As Electron Transport Layer for Planar Heterojunction Perovskite Solar Cells

Enhancing Conductivity in Silicon Heterojunction Solar Cells with Silver Nanowire-Assisted Ti3C2Tx MXene Electrodes for Cost-Effective and Scalable Photovoltaics

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Symmetric Dopant‐Free Si Solar Cells Enabled by TiOx Nanolayers: An In‐Depth Study on Bipolar Carrier Selectivity

Full-Area i-a-Si:H/ATO/Mg Electron-Selective Contacts for Silicon Solar Cells

Accelerating hole extraction by inserting 2D Ti3C2-MXene interlayer to all inorganic perovskite solar cells with long-term stability

Improving Carrier Transport for Stable and Efficient Perovskite Solar Cells Via MXene-modified 2D Perovskite Capping Layer

Solution‐Processed Electron‐Selective Contacts Enabling 21.8% Efficiency Crystalline Silicon Solar Cells

Tunable work function of molybdenum oxynitride for electron-selective contact in crystalline silicon solar cells

Hybridization of SnO2 and an In-Situ-Oxidized Ti3C2Tx MXene Electron Transport Bilayer for High-Performance Planar Perovskite Solar Cells

< 50-μm thin crystalline silicon heterojunction solar cells with dopant-free carrier-selective contacts