Abstract:The microcompression method was used to investigate the compressive plastic flow behavior of nanolayered crystalline/amorphous (C/A) Cu/Cu–Zr micropillars within wide ranges of intrinsic layer thicknesses (h∼5–150nm) and extrinsic sample sizes (350–1425nm) with the goal of revealing the intrinsic size effect, extrinsic size effect and their interplay on the plastic deformation behavior. The nanolayered C/A micropillars exhibited deformation behaviors of strain-hardening followed by strain-softening that were dependent on the thickness of the layers. At h⩽10nm, the strain-softening is related to shear deformation that is caused by fractures in the amorphous layers. At h>10nm, however, the strain-softening is related to the reduction in dislocation density caused by dislocation absorption. Correspondingly, the deformation mode of the C/A micropillars transitioned from homogeneous-like to shear band type as h decreased to the critical value of ∼10nm, which is indicative of a significant intrinsic size effect. The extrinsic size effect on the plastic deformation also became remarkable when h was less than ∼10nm, and the interplay between the intrinsic and extrinsic size effects leads to an ultrahigh strength of ∼4.8GPa in the C/A micropillars, which is close to the ideal strength of Cu and considerably greater than the ideal strength of the amorphous phase. The underlying strengthening mechanism was discussed, and the transition in deformation mode was quantitatively described by considering the strength discrepancy between the two constituent crystalline and amorphous layers at different length scales.

Stepwise work hardening induced by individual grain boundary in Cu bicrystal micropillars

Grain boundary effects on the inelastic deformation behavior of bicrystals

Tensile Deformation Behavior of Copper Bicrystal with Perpendicular Grain Boundary

Atomic-scale Study of Dislocation-Grain Boundary Interactions in Cu Bicrystal by Berkovich Nanoindentation

Influences of Symmetric Tilt Grain Boundary on the Stretching Deformation Behaviors of Cu Bicrystals

Strain Rate Effects on the Mechanical Response in Multi- and Single-Crystalline Cu Micropillars: Grain Boundary Effects

A Close Observation on the Deformation Behavior of Bicrystal Copper under Tensile Loading

Experimental investigation of distance effects between indenter and grain boundary on nanoindentation of Cu bicrystal

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Elastic-plastic Stress Distribution Near Grain Boundary in Anisotropic Bicrystals and Tricrystals Considering Two Kinds of Grain Boundaries

Non-uniform Stress Field and Stress Concentration Induced by Grain Boundary and Triple Junction of Tricrystal

Tension/compression asymmetry of grain boundaries with non-planar structure

Grain Boundary Orientation Effects on Deformation of Ta Bicrystal Nanopillars under High Strain-Rate Compression

Transition from Homogeneous-Like to Shear-Band Deformation in Nanolayered Crystalline Cu/amorphous Cu–Zr Micropillars: Intrinsic Vs. Extrinsic Size Effect

Emergence of external size effects in the bulk-scale polycrystal to small-scale single-crystal transition: A maximum in the strength and strain-rate sensitivity of multicrystalline Cu micropillars

Two-Tier Compatibility of Superelastic Bicrystal Micropillar at Grain Boundary

Inter-granular and Intra-granular Crack Behavior in Mg Bicrystal of [ 12 10 ] Symmetric Tilt Grain Boundary: LEFM Prediction and Atomic Simulation

Effects of Grain Boundaries and Quasi-Plastic Deformation in Shocked Bi-Crystal Boron Carbide Nanopillars

Effect of the ∑5(310)/[001]θ = 53.1° Grain Boundary on the Incipient Yield of Bicrystal Copper: A Quasicontinuum Simulation and Nanoindentation Experiment

Strain localization and fatigue cracking behaviors of Cu bicrystal with an inclined twin boundary

Atomistic simulation of tensile deformation behavior of ∑5 tilt grain boundaries in copper bicrystal.