Abstract:Heat transfer between mould and strand has a critical influence on billet quality, caster productivity and operating safety. It is very important to obtain the correct distributions of temperature and heat flux, and many studies are made on the calculation methods of heat transfer between strand and mould, aiming to reduce the computation time and improve the calculation accuracy. In the present paper, based on measured data of temperature and heat flux during round billet continuous casting, the calculation method which combines the online measurement data and numerical simulation was investigated. Through identifying the local thermal resistance and its distribution between the mould and the strand by an inverse heat transfer model, the heat flux and shell thickness profiles were calculated. To avoid the iterative solution by inverse model, a faster alternative model using an artificial neural network was developed to predict the thermal resistance from the measured temperature. After training, there is an exact correspondence between the observed temperature values and the thermal resistance. The calculation results obtained by the combination of neural network and numerical simulation can correctly reflect the characteristics of non-uniform heat transfer around the mould circumference, which provides a worthwhile and applicable method for online calculation and visual technology of heat transfer and solidification in continuous casting mould.

Prediction of boundary heat flux in mold by inverse problem method

A numerical method for two-dimensional nonlinear transient inverse heat conduction problems for orthotropic material

Calculation of Heat Flux Across the Hot Surface of Continuous Casting Mold Through Two-Dimensional Inverse Heat Conduction Problem

Novel Methodologies for Solving the Inverse Unsteady Heat Transfer Problem of Estimating the Boundary Heat Flux in Continuous Casting Molds

Development of an Inverse Heat Transfer Model and Its Application in the Prediction of the Interfacial Heat Flux

Mathematical Modeling of Thermal Resistances of Mold Flux and Air Gap in Continuous Casting Mold Based on an Inverse Problem

3-D Inverse Problem Continuous Model for Thermal Behavior of Mould Process Based on the Temperature Measurements in Plant Trial

A Complete Thermal Analysis of a Funnel-Type Mold Used in High-Speed Thin Slab Continuous Casting Through Three-Dimensional Inverse Heat Conduction Problem

A 3D model coupled inverse algorithm for the non-uniform thermal behavior of a continuous casting mold

Inverse Heat Conduction Problem for Estimating Heat Flux on A Triangular Wall

Combination of Inverse Problem and Neural Network for Thermal Behaviour Calculation of Mould Process Based on Temperature Measurements in Plant Trial

Solving of Two-Dimensional Unsteady-State Heat-Transfer Inverse Problem Using Finite Difference Method and Model Prediction Control Method

Inverse Estimation of Transient Heat Flux to Slab Surface

Mold transient heat transfer behavior based on measurement and inverse analysis of slab continuous casting

Three-dimensional heat transfer analysis in a funnel type mold for thin slab continuous casting

Optimized Bayesian Framework for Inverse Heat Transfer Problems Using Reduced Order Methods

Calculation and discussion on the heat flux in mould of continuous casting round billet

A numerical approach for heat flux estimation in thin slabs continuous casting molds using data assimilation

Inverse Determination of Wall Boundary Convective Heat Fluxes in Indoor Environments Based on Cfd

Inverse Problem-Based Analysis on Non-Uniform Thermo-Mechanical Behaviors of Slab During Continuous Casting

Non-linear Heat Conduction Inversion Method Based on Deep Learning