Abstract:Billet production is for the most part completed in a continuous casting machine. To produce a billet of suitable quality, the secondary cooling control system needs to provide an appropriate value of water flow rate. At present, most secondary cooling control methods are based on a heat transfer model for the billet, the accuracy of which can directly impact the cooling effect and further affect its quality. In practice, it is difficult to determine the heat flux at the billet’s boundaries due to the complexity of continuous casting. Therefore, this study focuses on identifying the boundary conditions for the 3D heat transfer model of a billet with a linear coefficient. First, we transform the identification of boundary conditions into an optimization problem, prove the Lipschitz continuity of the cost function of the optimization problem, and obtain the Lipschitz constant. Second, based on the Lipschitz continuity of the cost function, we present a modified hybrid conjugate gradient algorithm (MHCGA) to solve the optimization problem and then prove the global convergence of this MHCGA. Compared with other methods, the results of the simulation experiments clearly show that this MHCGA can reduce running time and iteration number. Third, to eliminate the ill-posedness of the inverse problem for identifying the boundary condition, we combined a regularization method with MHCGA. Simulation experiments confirmed that this method can effectively estimate the boundary conditions. Finally, the experimental data from a steel plant verified the validity of our method, and the prediction results of the shell thickness were confirmed by the nail shooting method.

Inverse Estimation of Cooling Heat Flux in Spray Cooling of Hot Surface Based on Dual-Phase-Lag Model

Experimental Investigation of Spray Cooling Performance in Non‐boiling Zone on Rough Superhydrophilic/hydrophobic Surfaces

A numerical method for two-dimensional nonlinear transient inverse heat conduction problems for orthotropic material

Experimental Study on a Spray and Falling-Film Cooling System

Development of an Inverse Heat Transfer Model and Its Application in the Prediction of the Interfacial Heat Flux

Thin liquid film flow and heat transfer under spray impingement

Inverse Heat Conduction Problem for Estimating Heat Flux on A Triangular Wall

An inverse problem to estimate simultaneously the heat source strength for multiple integrated circuit chips on a printed circuit board

Transient heat transfer characteristics in spray cooling

A semi-analytical method of three-dimensional dual-phase-lagging heat conduction model

A FEM-Based Inverse Calculation Method for Determination of Heat Transfer Coefficient in Liquid Quenching Process

Estimation of Unknown Boundary Heat Flux in Laminar Circular Pipe Flow Using Functional Optimization Approach: Effects of Reynolds Number

A numerical study on multi-nozzle spray cooling of downward-facing heater surface

Estimation of Surface Temperature and Heat Flux over a Hollow Cylinder and Slab using an Inverse Heat Conduction Approach

Prediction of boundary heat flux in mold by inverse problem method

A two-dimensional inverse heat conduction problem for simultaneous estimation of heat convection coefficient, fluid temperature and wall temperature on the inner wall of a pipeline

Solving of Two-Dimensional Unsteady-State Heat-Transfer Inverse Problem Using Finite Difference Method and Model Prediction Control Method

Inverse Estimation of Swirl Cooling Heat Transfer Coefficient

Estimation of the boundary condition of a 3D heat transfer equation using a modified hybrid conjugate gradient algorithm

Hybrid approach for solution of inverse heat conduction problems

Solution to inverse natural convection problem using experimental data