Abstract:Abstract Aerodynamic experiments in the high-speed flow domain mainly rely on precise measurement of transient surface temperatures and subsequent quantification of heat flux. These experiments are primarily simulated in high-enthalpy short-duration facilities for which test flow durations are in the order of a few milliseconds, and the thermal loads resemble the nature of step/impulse. This study focuses on a specially designed fast-response coaxial surface junction thermal probe (CSTP) with the capability of capturing transient temperature signals. The CSTP, with a 3.25 mm diameter and 13 mm length, incorporates a precisely examined sensing junction (20 μm thickness) and EDX, FESEM verified surface characterization. The short-duration calibration experiments are realized to mimic the simulated flow conditions of high-enthalpy test facilities. The classical one-dimensional heat conduction modeling has been used to deduce surface heat flux from the acquired temperature responses. It demonstrates a commendable accuracy of ±2.5% when compared with known heat loads of calibration experiments. Departing from traditional heat conduction models, an advanced soft-computing technique, the Adaptive Neuro-Fuzzy Inference System (ANFIS), is introduced for short-duration heat flux predictions. This methodology successfully recovers known (step or ramp) heat loads within a specific experimental time frame (0.2 s). The results exhibit excellent agreement in the prediction of trend and magnitude, carrying uncertainties of ±3% for radiative and ±5% for convective experiments. Consequently, the CSTP appears as a rapidly responsive transient heat flux sensor for real-time short-duration experiments. The soft-computing approach (ANFIS) offers an alternative means of heat flux estimation from temperature history irrespective of the mode of heat transfer and nature of heat load, marked by its prediction accuracy, diminished mathematical intricacies, and reduced numerical requisites.

Development of an Inverse Heat Transfer Model and Its Application in the Prediction of the Interfacial Heat Flux

A numerical method for two-dimensional nonlinear transient inverse heat conduction problems for orthotropic material

Prediction of boundary heat flux in mold by inverse problem method

Inverse Heat Conduction Problem for Estimating Heat Flux on A Triangular Wall

Solving of Two-Dimensional Unsteady-State Heat-Transfer Inverse Problem Using Finite Difference Method and Model Prediction Control Method

Inverse Estimation of Cooling Heat Flux in Spray Cooling of Hot Surface Based on Dual-Phase-Lag Model

Soft Computing Model for Inverse Prediction of Surface Heat Flux From Temperature Responses in Short-Duration Heat Transfer Experiments

Estimation of Surface Temperature and Heat Flux over a Hollow Cylinder and Slab using an Inverse Heat Conduction Approach

INVERSE HEAT CONDUCTION PROBLEM OF DEDUCING INNER WALL TEMPERATURE BY USING CONJUGATE GRADIENT METHOD

Deducing Flux from Single Point Temperature History when Relative Spatial Variation of Flux is Prescribed

Application of inverse heat conduction calculation method for fast-transient flow boiling heat transfer analysis

Thin liquid film flow and heat transfer under spray impingement

Two-dimensional transient heat transfer model of moving quenching jet based on machine learning

Estimation of Unknown Boundary Heat Flux in Laminar Circular Pipe Flow Using Functional Optimization Approach: Effects of Reynolds Number

Inverse Estimation of Dynamic Heat Flux Using Proportional Integral Derivative Control

A comprehensive heat transfer prediction model for tubular moving bed heat exchangers using CFD-DEM: Validation and sensitivity analysis

ICONE23-1360 A NEW DETERMINATION APPROACH ON CRITICAL HEAT FLUX WITH INVERSE HEAT CONDUCTION PROBLEM

Novel study on inverse convection–conduction heat transfer for plate-finned tube heat exchanger

Solution to inverse natural convection problem using experimental data

Development of a new semi-mechanistic wall boiling heat transfer model for CFD methodology focusing on macroscopic parameters

Identification of the Heat Transfer Coefficient Using an Inverse Heat Conduction Model